commit 258f3dad6471a680c2c583a300cfd396efe9a037
Author: Paul Jakma <paul.jakma@hpe.com>
Date: Tue Oct 18 14:03:52 2016 +0100
release: Bump version to 1.1.0
commit de58bdb9cdbd88baae7123856462380df365b7ff
Author: Paul Jakma <paul.jakma@hpe.com>
Date: Tue Oct 18 14:03:37 2016 +0100
build: remove werror from buildtest.sh for now
commit cfb1fae25f8c092e0d17073eaf7bd428ce1cd546
Author: David Lamparter <equinox@opensourcerouting.org>
Date: Wed Aug 31 13:31:16 2016 +0200
zebra: stack overrun in IPv6 RA receive code (CVE-2016-1245)
The IPv6 RA code also receives ICMPv6 RS and RA messages.
Unfortunately, by bad coding practice, the buffer size specified on
receiving such messages mixed up 2 constants that in fact have
different values.
The code itself has:
#define RTADV_MSG_SIZE 4096
While BUFSIZ is system-dependent, in my case (x86_64 glibc):
/usr/include/_G_config.h:#define _G_BUFSIZ 8192
/usr/include/libio.h:#define _IO_BUFSIZ _G_BUFSIZ
/usr/include/stdio.h:# define BUFSIZ _IO_BUFSIZ
FreeBSD, OpenBSD, NetBSD and Illumos are not affected, since all of them
have BUFSIZ == 1024.
As the latter is passed to the kernel on recvmsg(), it's possible to
overwrite 4kB of stack -- with ICMPv6 packets that can be globally sent
to any of the system's addresses (using fragmentation to get to 8k).
(The socket has filters installed limiting this to RS and RA packets,
but does not have a filter for source address or TTL.)
Issue discovered by trying to test other stuff, which randomly caused
the stack to be smaller than 8kB in that code location, which then
causes the kernel to report EFAULT (Bad address).
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
commit ef9bc88981570ef8ea744f0ab96730d192328a49
Author: Christian Franke <nobody@nowhere.ws>
Date: Tue Jun 14 20:07:06 2016 +0200
isisd: Fix size of malloc
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
commit 985823ff91ed784b9affdb0104f617b2c1732dab
Author: Christian Franke <nobody@nowhere.ws>
Date: Tue Jun 14 20:07:05 2016 +0200
isisd: fix an error that was probably a result of copypasting
The code should check for the existance of the correct list prior to
accessing it.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
commit 8548973ace90a78035893c3663c18b485425e291
Author: Christian Franke <nobody@nowhere.ws>
Date: Tue Jun 14 20:07:04 2016 +0200
ospf6d: fix off-by-one on display of spf reasons
The loop should only iterate to array_size - 1.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
commit 7fca43f7184f6eb9fbe952f1eecaafcf079502f2
Author: Christian Franke <nobody@nowhere.ws>
Date: Tue Jun 14 20:07:03 2016 +0200
ospf6d: don't access nexthops out of bounds
Given that the && is evaluated lazily from left to right,
i < OSPF6_MULTI_PATH_LIMIT should be checked prior to calling
ospf6_nexthop_is_set on the array element, not the other way around.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
commit 0d8b32a5ee43ccc4a67dd87ab21a4ab553e3bf44
Author: Christian Franke <nobody@nowhere.ws>
Date: Tue Jun 14 20:07:00 2016 +0200
bgpd: fix off-by-one in attribute flags handling
bgp_attr_flag_invalid can access beyond the last element of attr_flags_values.
Fix this by initializing attr_flags_values_max to the correct value.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
commit bb04351973bd369623a0fbed3ef59e7b4fd0bd05
Author: Lou Berger <lberger@labn.net>
Date: Mon Oct 10 11:56:52 2016 -0400
bgp: restore missing check from original ignore NHT change
commit e33545cb9d7a8c7875f18b6d44bf75d320ccedfb
Author: Lou Berger <lberger@labn.net>
Date: Mon Oct 10 09:50:58 2016 -0400
bgp: fix warning in bgp_nht.c
commit 68bfb6190e19898adc0e420b6346cf4778705e60
Author: Lou Berger <lberger@labn.net>
Date: Thu Oct 6 09:59:32 2016 -0400
bgp: ignore NHT when bgpd has never connected zebra
commit 743dd42b3f5d4bc5f9a86b91364c67217f42c6d1
Author: Paul Jakma <paul.jakma@hpe.com>
Date: Fri Sep 30 13:55:47 2016 +0100
bgpd: Fix NHT race with Connect leading to test tool issues
* The NHT change:
"bgpd, zebra: Use next hop tracking for connected routes too"
introduces a race where bgp_connect_check can be called on a peer in
Connect state before the TCP handshake has completed. If this happens,
then the SO_ERROR sockopt to check the state of the socket is undefined
or at least does not return a useful result - it returns 0, as with
a connected socket. SO_ERROR should only be called on non-block sockets
after the socket has been ready for writing.
The net result is that bgpd can then incorrectly advance the peer FSM for
the socket (also the main 'peer'), to OpenSent. As part of which, any
incoming connection from the peer will pass through collision_detect and
may be (incorrectly) closed, depending on the RIDs.
This race is reliably hit with testing tools which wait to listen for
incoming BGP connections from the RUT to know it is in Connect/Active, and
which ignore the TCP connection (no SYN|ACK, no RST), and then launch their
own connection.
The fix is to better integrate the BGP FSM and the NHT update, to ensure
connect_check is not called on peers in Connect state.
Note: There may be no need at all for NHT to tickle FSM.
* bgpd.h: Add NHT_Update FSM event for NHT valid.
* bgp_fsm.c: (bgp_fsm_nht_update) There is no need to have a separate
switch based FSM with its own event via an exported function. Have
NHT raise the NHT_Update even on the peer, instead of calling a
side-channel function into a sub-FSM in the FSM. No need to have
code for BGP_Start, FSM can call that. Actions for Connect and
Active are the same and just lead to ConnectRetry_timer_expired
event - so FSM can just call same transition func as that.
No need to call bgp_connect_check on Connect, as Connect implies no
connection.
(FSM) Handle the NHT_Update event, replacing bgp_fsm_nht_update.
Idle -> bgp_start, Connect and Active were doing the same as
ConnectRetry_timer_expired so replicate those. Rest are No-Ops.
* bgp_nht.c: (evaluate_paths) Raise NHT_Update FSM event. Always valid.
* bgp_packet.{c,h}: (bgp_connect_check) NHT change now unnecessary, revert.
commit af177b245ef3f092ecd0ae75cb75c2d797a7b139
Author: Christian Franke <nobody@nowhere.ws>
Date: Mon Aug 15 13:36:59 2016 +0200
isisd: warn if there is an MTU issue on circuits
Instead of later tripping over an assert, add a proper warning for
interfaces whose MTU is too low.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
commit 4c7d7173baa9fe064349f5fe2e0bdcb367475499
Author: David Lamparter <equinox@opensourcerouting.org>
Date: Sat Aug 13 01:32:52 2016 +0200
isisd: fold up isis_circuit_is_type_set()
see previous commit.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
commit 1187e25191b38a1876fafbfd733a70942ebcb062
Author: David Lamparter <equinox@opensourcerouting.org>
Date: Sat Aug 13 01:20:20 2016 +0200
isisd: fix is_type_set
Code's "is_type" is "circuit-type" in CLI, "circuit_type" is "network"
(type) in CLI, and the function to change is_type is
isis_event_circuit_type_change()... *headdesk*
Reported-by: Martin Winter <mwinter@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
commit a798abbe65cc2cdce050a1aef85c6d243d44a575
Author: Christian Franke <nobody@nowhere.ws>
Date: Thu Aug 11 16:08:05 2016 +0200
isisd: fix network-type configuration
Reported-by: Martin Winter <mwinter@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
commit 5a1a087baebcc4a996de66c558bac49419034ee0
Author: David Lamparter <equinox@opensourcerouting.org>
Date: Thu Aug 11 17:02:50 2016 +0200
isisd: fix isis_circuit_af_set() on fresh circuit
A newly-created circuit will be in enabled state but have neither IPv4
nor IPv6 configured. The logic in isis_circuit_af_set assumed that
"enabled" is equivalent to "ip || ipv6".
This is the only place where this distinction is currently relevant, as
the CLI won't allow enabling an interface without enabling either IPv4
or IPv6; and it will also disable a circuit when both are deconfigured.
Reported-by: Martin Winter <mwinter@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
commit 515812ddbbb6a41298261688c8ccd0df8e900f17
Author: David Lamparter <equinox@opensourcerouting.org>
Date: Thu Aug 11 16:59:08 2016 +0200
isisd: fix isis_circuit_create()
Between the awkwardly managed CSM and the tacked-on IPv6 support, the
simplified logic to setup a circuit wasn't quite right.
Note that the API essentially allows creating a circuit without enabling
either IPv4 or IPv6. This wasn't possible before and probably breaks
isisd in 'interesting' ways. The CLI won't do this, so it's only an
issue when adding on other configuration mechanisms.
Reported-by: Martin Winter <mwinter@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
commit f263413f762058d887aa7b2b6c502bd84af3c923
Author: David Lamparter <equinox@opensourcerouting.org>
Date: Thu Jul 28 17:23:32 2016 +0200
isisd: drop unused per-type metric values
Expense, Error and Delay metrics never quite made it into the real
world. Either way isisd does nothing useful with them, so let's drop
them from the code. If someone wants to implement them, this patch can
still be reverted.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
commit 68845c19e468480dbdf5483f0b60323674a5ec28
Author: Christian Franke <nobody@nowhere.ws>
Date: Thu Jul 28 17:23:31 2016 +0200
isisd: API: area (L1), domain (L2) passwords
Last isisd CLI cleanup for now. This also folds L1 & L2 configs into
common functions, reducing CLI function bloat by a bit.
(This patch contains changes authored by both Christian Franke and David
Lamparter.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
commit 4570ca47e11602b25e37ab709fa00bdf8c183afb
Author: Christian Franke <nobody@nowhere.ws>
Date: Thu Jul 28 17:23:30 2016 +0200
isisd: API: timers (LSP, SPF)
See previous commits...
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
commit 304c7dac53e2b1b3dc135ce2ff1aa38df46ec727
Author: Christian Franke <nobody@nowhere.ws>
Date: Thu Jul 28 17:23:29 2016 +0200
isisd: API: LSP-MTU & area level
Yet more CLI functions in isis_vty.c using more nice setters.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
commit b5d2f5f5085147ff9e9d5ace7705c422cbc6afd0
Author: David Lamparter <equinox@opensourcerouting.org>
Date: Thu Jul 28 17:23:28 2016 +0200
isisd: API: timers (IIH, CSNP, PSNP)
No setters needed since change of fields doesn't require any
specific action to make it apply. Just move the CLI defs to isis_vty.c.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
commit f5fbfb26e961d6b4b129f98bc27a3e822620eba3
Author: Christian Franke <nobody@nowhere.ws>
Date: Thu Jul 28 17:23:27 2016 +0200
isisd: API: circuit password
This cleans up circuit password configuration a little bit.
(Restructured several times by both Christian Franke and David
Lamparter.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
commit ccd485d17b13f3b6f5669be9b8820d8807468d98
Author: Christian Franke <nobody@nowhere.ws>
Date: Thu Jul 28 17:23:26 2016 +0200
isisd: API: basic area config
Move out basic area configuration (metric type, overload and attachment
bits, dynamic hostname extension enable) into isis_vty.c.
[v2: moved stuff back here that accidentally was in the previous patch]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
commit 3732cba03049b18fc414c36254cfc11186b2ba53
Author: David Lamparter <equinox@opensourcerouting.org>
Date: Fri Jul 29 16:19:40 2016 +0200
isisd: API: basic circuit config
Create isis_vty.c and start moving off CLI functions into that. These
then call newly-added "nice" API wrappers.
Patch contains significant work authored by Christian Franke.
[v2: removed stuff that crept in from the next patch]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
commit f5603ccd01131a1905b842e36171d0f5c0424496
Author: Paul Jakma <paul.jakma@hpe.com>
Date: Mon Sep 12 13:53:08 2016 +0100
isisd: cleanup isis_circuit_lookup, errant from TE changes?
commit b4e011985232f28d98e4df88c7cb13ee8f95ef46
Author: Evgeny Uskov <eu@qrator.net>
Date: Wed Jan 13 13:58:00 2016 +0300
bgpd: Fix buffer overflow error in bgp_dump_routes_func
Now if the number of entries for some prefix is too large, multiple
TABLE_DUMP_V2 records are created. In the previous version in such
situation bgpd crashed with SIGABRT.
commit 810ab34c56a9b9b8870b961bc96986e6b8550863
Author: Lou Berger <lberger@labn.net>
Date: Mon Sep 5 12:18:15 2016 -0400
bgp: bgp_nexthop init/free AFI_ETHER related NH tables
commit 19e6c193db0c74ed08dbb5cd30dfa8f6a4377af0
Author: Paul Jakma <paul.jakma@hpe.com>
Date: Tue Sep 6 17:23:48 2016 +0100
bgpd: bgp_nexthop_cache not deleted with peers
* Fix mild leak, bgp_nexthop_caches were not deleted when their peer was.
Not a huge one, but makes valgrinding for other leaks noisier.
Credit to Lou Berger <lberger@labn.net> for doing the hard work of
debugging and pinning down the leak, and supplying an initial fix.
That one didn't quite get the refcounting right, it seemed, hence
this version.
This version also keeps bncs pinned so long as the peer is defined, where
Lou's tried to delete whenever the peer went through bgp_stop. That causes
lots of zebra traffic if down peers go Active->Connect->Active, etc., so
leaving bnc's in place until peer_delete seemed better.
* bgp_nht.c: (bgp_unlink_nexthop_by_peer) similar to bgp_unlink_nexthop, but
by peer.
* bgp_nht.c: (bgp_unlink_nexthop_check) helper to consolidate checking
if a bnc should be deleted.
(bgp_unlink_nexthop_by_peer) ensure the bnc->nht_info peer reference
is removed, and hence allow bncs to be removed by previous.
* bgpd.c: (peer_delete) cleanup the peer's bnc.
commit c365b534623279049bc4cc0c5d03fdbcd2d466b0
Author: Lou Berger <lberger@labn.net>
Date: Tue Jul 26 10:58:53 2016 -0400
bgpd: Remove unused and leaking code
commit 4b502fdb64db6fcad5359973e3ff7e7c88e93a7d
Author: Paul Jakma <paul.jakma@hpe.com>
Date: Wed Jul 27 17:06:32 2016 +0100
tests: Fix testbgpmpattr and make check, broken by BGP NHT.
* bgp_mp_attr_test.c: Fix segfault due to uninitialised bgp_nexthop_cache
globals in nexthop parsing path, which require bgp_scan_init() to have
been called.
Fixes issue introduced with:
'bgpd, zebra: Use next hop tracking for connected routes too'
commit 789dfc9fe07e23e6c73a299ecbbcbb6d3d411391
Author: Paul Jakma <paul.jakma@hpe.com>
Date: Tue Sep 6 11:20:27 2016 +0100
bgpd: Fix crash in 'show ip bgp nexthop'
* bgp_nexthop.c: (show_ip_bgp_nexthop_table) the AFIs are sparse, and start
from 1, check there's a table before derefing so as not to crash.
commit d9ab53ab40dcba66f34ca75695dc930e6093f789
Author: Dinesh Dutt <ddutt@cumulusnetworks.com>
Date: Tue May 19 17:47:21 2015 -0700
bgpd, zebra: Use next hop tracking for connected routes too
Allow next hop tracking to work with connected routes
And cleanup obsolete code in bgp_scan and bgp_import.
Signed-off-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Edits: Paul Jakma <paul.jakma@hpe.com> Rebase re-ordering conflicts with
NHT route-map, potential errors.
commit 5bcd754ff8d7947978acb44e77dcab323973fb1e
Author: Daniel Walton <dwalton@cumulusnetworks.com>
Date: Tue May 19 17:58:10 2015 -0700
bgpd: crash if attributes alone consume > 4096 bytes
This patch fixes a crash if attributes on a patch consume
more than 4096 bytes.
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
commit 6c6c1bf0fc66713cb0b3448a4323042f44016502
Author: Daniel Walton <dwalton@cumulusnetworks.com>
Date: Mon Nov 9 20:21:56 2015 -0500
bgpd: Improve peer scaling
Reduce the amount of time it takes to bring up a large number of peers.
This is accomplished by removing jitter and reducing the number
of seconds to wait before connecting to a peer.
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Edited-by: Paul Jakma <paul.jakma@hpe.com> for rebase conflicts, and to add
jitter on connect timer back in. Can be removed in an update.
commit e25a9741fb1ba52a69833687caa01f13cd4d1320
Author: Daniel Walton <dwalton@cumulusnetworks.com>
Date: Mon Nov 9 20:21:50 2015 -0500
bgpd: don't count a route with an unreachable nexthop in PfxRcd
When a route is received from a peer that we cannot
reach do not count that route as a received route.
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
commit cb9ed1d867f6ac9e0bad85c47aabeb10b94be2e5
Author: Donald Sharp <sharpd@cumulusnetworks.com>
Date: Thu Jan 14 09:19:29 2016 -0500
ospf6d: Fix double increment of Sequence Number
When OSPF6 is creating the header for the ROUTER LSA type
if the packet being sent has interface information to add
to the data, the Sequence Number is at least double incremented.
This commit may cause issues with ANVL 16.10.
[note: folded in:
"ospf6d: Fix Some ANVL test cases 16.6 and partial 16.10"
-- Paul Jakma]
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
commit 4f84737dee1e84b7219f66e983812abd8a6ca1d3
Author: Donald Sharp <sharpd@cumulusnetworks.com>
Date: Tue Dec 22 15:24:25 2015 -0500
zebra: Fix some warnings found during compile.
This commit fixes some warnings found in Martin's Testbed
that compiles sun solaris and freebsd images.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
commit afc9cf97363c0b7ec6c253731a75ac83e70ea190
Author: Vipin Kumar <vipin@cumulusnetworks.com>
Date: Tue May 19 18:03:50 2015 -0700
osfd: Make OSPF compliant to the last sentence of this section in RFC 2328
9.5 Sending Hello packets
Hello packets are sent out each functioning router interface.
They are used to discover and maintain neighbor
relationships.[6] On broadcast and NBMA networks, Hello Packets
are also used to elect the Designated Router and Backup
Designated Router.
The format of an Hello packet is detailed in Section A.3.2. The
Hello Packet contains the router's Router Priority (used in
choosing the Designated Router), and the interval between Hello
Packets sent out the interface (HelloInterval). The Hello
Packet also indicates how often a neighbor must be heard from to
remain active (RouterDeadInterval). Both HelloInterval and
RouterDeadInterval must be the same for all routers attached to
a common network. The Hello packet also contains the IP address
mask of the attached network (Network Mask). On unnumbered
point-to-point networks and on virtual links this field should
be set to 0.0.0.0.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
commit fc2cee2bed4ebf664ba0afa1678027365f3923f7
Author: Daniel Walton <dwalton@cumulusnetworks.com>
Date: Tue May 19 18:03:44 2015 -0700
zebra: Fix incorrectly flagged nexthop
A valid BGP nexthop is sometimes flagged as invalid, this patch
fixes that issue.
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Edited-by: Paul Jakma <paul.jakma@hpe.com>, also add the check for
NEXTHOP_FLAG_ACTIVE which was added in a separate, route-map related commit
(6baeed5 lib, zebra: Add route-map support for Next Hop Tracking)
commit c69698704806a9ac5035521b1820057097919227
Author: Daniel Walton <dwalton@cumulusnetworks.com>
Date: Tue May 19 18:03:43 2015 -0700
bgpd: Correct a few fuzz failures in BGP
Testing revealed some issues with handling data input.
This patch fixes those issues.
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
commit cb37de4c6863c772b654a851c9fe3eeb1f677692
Author: Vipin Kumar <vipin@cumulusnetworks.com>
Date: Tue May 19 18:03:40 2015 -0700
ospf6d: Fix loss of hello's on interface
SYMPTOM:
With quagga running on Linux, 'ifdown <if-name>' followed by 'ifup <ifname>
can cause OSPFv3 to not receive Hello packets on the interface.
ISSUE:
Operating System's interface IPv6 readiness may not be guaranteed at the
time of interface-up event. Thats because the ipv6 components in an OS may
also be listening to the same interface-up event that (in this case) is
relayed to OSPFv3.
In this failure case, setsockopt with option IPV6_JOIN_GROUP on the interface
returned EINVAL.
Error logs -
OSPF6: Zebra Interface state change: swp1 index 3 flags 11043 metric 1 mtu 1500
OSPF6: Interface Event swp1: [InterfaceUp]
OSPF6: Network: setsockopt (20) on ifindex 3 failed: Invalid argument
FIX:
To take care of this possible race condition, any address-family related
setting should be retried. Given it's a rare condition and window of this
race should be short, the patch adds a limited retry mechanism for the
IPV6 membership setting on the socket.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Reviewed-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
Satish Ashok <sashok@cumulusnetworks.com>
commit 2153090340f059eb787d72ba973ea55e150e9dec
Author: Daniel Walton <dwalton@cumulusnetworks.com>
Date: Tue May 19 18:03:38 2015 -0700
bgpd: Fix BGP_INFO_ATTR_CHANGED being cleared incorrectly
back to back route refreshes can set BGP_INFO_ATTR_CHANGED
on the first route refresh but then clear it on the second
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
commit 4c7efde6db75229069be72b34a93f279fe57d23b
Author: Donald Sharp <sharpd@cumulusnetworks.com>
Date: Mon Nov 16 18:19:18 2015 -0500
zebra: Add check to notice when an interface is unnumbered
If an interface is not a loopback and it's prefixlen == 32
assume that it is unnumbered.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
commit 988a50c54dbd20290c085a36d4c2893f3d515803
Author: Daniel Walton <dwalton@cumulusnetworks.com>
Date: Tue May 19 17:58:11 2015 -0700
bgpd, lib: Clarify the different permutations of soft clearing a peer
Cleanup vtysh output for the soft clearing of a bgp peer so
that it is clearer what is going to happen.
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
commit 9e518dd52b1fbf7d395a6bb49a101d632ced5e5b
Author: Daniel Walton <dwalton@cumulusnetworks.com>
Date: Tue May 19 17:47:26 2015 -0700
bgpd: Alow gracefull shutdown of peers
Send CEASE NOTIFICATIONS to all peers on "no router bgp"
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
commit 9ae8552c7341071ffac34aec9902fa3dd7dc8fdf
Author: Dinesh Dutt <ddutt@cumulusnetworks.com>
Date: Tue May 19 17:47:22 2015 -0700
zebra: Gather and display detailed info about clients of Zebra
The display of zebra client info is rather paltry: just the name and the FD.
For troubleshooting and general helpfulness, its useful to gather more info
about each client and display that. This patch does just that.
Signed-off-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
commit c7f25b90902d4be39132b1174440746b571220ce
Author: Daniel Walton <dwalton@cumulusnetworks.com>
Date: Tue May 19 17:47:22 2015 -0700
bgpd, ospfd, ospf6d, ripd, ripngd, zebra: 'set metric -12' is broken in the parser
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
commit f2eb9caac6425473af8d6d15534439fe715f7426
Author: Daniel Walton <dwalton@cumulusnetworks.com>
Date: Tue May 19 17:47:21 2015 -0700
bgpd: atomic-aggregate is lost when we aggregate another aggregate that has atomic-aggregate
This patch ensures that we don't accidently loose the atomic-aggregate
when we aggregate another aggregate that also has atomic-aggregates.
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
commit 96d1060a704d88e04fcd446cce078a6131c3f6db
Author: Paul Jakma <paul.jakma@hpe.com>
Date: Fri Jul 1 14:23:45 2016 +0100
*: Widen width of Zserv routing tag field.
* lib/zebra.h: Introduce a route_tag_t type for route tags generally,
and make it 4 bytes wide - so it can directly hold things like an ASN, or
the OSPF ASE-LSA tag.
* zebra/rib.h: Use route_tag_t instead of u_short.
* *: Update 'u_short (*)?(tag|tmp)' to use route_tag_t instead of u_short.
Update stream_{get,put} to l instead of w.
* ospf_zebra.c: (ospf_zebra_add) test OSPF tag within range of ROUTE_TAG_MAX.
commit 3b4fb574b414e7b7776b581688f189f2fc736a38
Author: Piotr Chytła <pch@packetconsulting.pl>
Date: Tue Dec 1 10:16:02 2015 -0500
ripd, ripngd: add support for route tags
[Forward ported by Cumulus]
Documentation
-------------
All ipv4 and ipv6 static route commands now have a "tag" option
which allows the user to set a tag between 1 and 65535.
quagga(config)# ip route 1.1.1.1/32 10.1.1.1 tag ?
<1-65535> Tag value
quagga(config)# ip route 1.1.1.1/32 10.1.1.1 tag 40
quagga(config)#
quagga# show ip route 1.1.1.1/32
Routing entry for 1.1.1.1/32
Known via "static", distance 1, metric 0, tag 40, best
* 10.1.1.1, via swp1
quagga#
The route-map parser supports matching on tags and setting tags
!
route-map MATCH_TAG_18 permit 10
match tag 18
!
!
route-map SET_TAG_22 permit 10
set tag 22
!
BGP and OSPF support:
- matching on tags when redistribing routes from the RIB into BGP/OSPF.
- setting tags when redistribing routes from the RIB into BGP/OSPF.
BGP also supports setting a tag via a table-map, when installing BGP
routes into the RIB.
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Signed-off-by: Piotr Chytla <pch@packetconsulting.pl>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
commit fb214471c88616d67ece3734128ef04ed4a8ed86
Author: Piotr Chytła <pch@packetconsulting.pl>
Date: Tue Dec 1 13:47:06 2015 -0500
zebra: add support for route tags
[Forward ported by Cumulus]
Documentation
-------------
All ipv4 and ipv6 static route commands now have a "tag" option
which allows the user to set a tag between 1 and 65535.
quagga(config)# ip route 1.1.1.1/32 10.1.1.1 tag ?
<1-65535> Tag value
quagga(config)# ip route 1.1.1.1/32 10.1.1.1 tag 40
quagga(config)#
quagga# show ip route 1.1.1.1/32
Routing entry for 1.1.1.1/32
Known via "static", distance 1, metric 0, tag 40, best
* 10.1.1.1, via swp1
quagga#
The route-map parser supports matching on tags and setting tags
!
route-map MATCH_TAG_18 permit 10
match tag 18
!
!
route-map SET_TAG_22 permit 10
set tag 22
!
BGP and OSPF support:
- matching on tags when redistribing routes from the RIB into BGP/OSPF.
- setting tags when redistribing routes from the RIB into BGP/OSPF.
BGP also supports setting a tag via a table-map, when installing BGP
routes into the RIB.
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Signed-off-by: Piotr Chytla <pch@packetconsulting.pl>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
commit 605aa331d814b0977dd8435168dca5b2b7928996
Author: Piotr Chytła <pch@packetconsulting.pl>
Date: Tue Dec 1 10:03:54 2015 -0500
bgpd, vtysh: Add support for route tags
[Forward ported by Cumulus]
Documentation
-------------
All ipv4 and ipv6 static route commands now have a "tag" option
which allows the user to set a tag between 1 and 65535.
quagga(config)# ip route 1.1.1.1/32 10.1.1.1 tag ?
<1-65535> Tag value
quagga(config)# ip route 1.1.1.1/32 10.1.1.1 tag 40
quagga(config)#
quagga# show ip route 1.1.1.1/32
Routing entry for 1.1.1.1/32
Known via "static", distance 1, metric 0, tag 40, best
* 10.1.1.1, via swp1
quagga#
The route-map parser supports matching on tags and setting tags
!
route-map MATCH_TAG_18 permit 10
match tag 18
!
!
route-map SET_TAG_22 permit 10
set tag 22
!
BGP and OSPF support:
- matching on tags when redistribing routes from the RIB into BGP/OSPF.
- setting tags when redistribing routes from the RIB into BGP/OSPF.
BGP also supports setting a tag via a table-map, when installing BGP
routes into the RIB.
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Signed-off-by: Piotr Chytla <pch@packetconsulting.pl>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Edits by: Paul Jakma <paul.jakma@hpe.com - conflicts on re-ordering with the
rmap-event and table-map patches, those will now need to update the tags stuff.
commit 2b2e38c3169ae0221645e4dd9b40388660ce3f68
Author: Piotr Chytła <pch@packetconsulting.pl>
Date: Tue Dec 1 10:10:41 2015 -0500
ospfd, vtysh: Add support for Route tags
[Forward ported by Cumulus]
Credit
------
A huge amount of credit for this patch goes to Piotr Chytla for
their 'route tags support' patch that was submitted to quagga-dev
in June 2007.
Documentation
-------------
All ipv4 and ipv6 static route commands now have a "tag" option
which allows the user to set a tag between 1 and 65535.
quagga(config)# ip route 1.1.1.1/32 10.1.1.1 tag ?
<1-65535> Tag value
quagga(config)# ip route 1.1.1.1/32 10.1.1.1 tag 40
quagga(config)#
quagga# show ip route 1.1.1.1/32
Routing entry for 1.1.1.1/32
Known via "static", distance 1, metric 0, tag 40, best
* 10.1.1.1, via swp1
quagga#
The route-map parser supports matching on tags and setting tags
!
route-map MATCH_TAG_18 permit 10
match tag 18
!
!
route-map SET_TAG_22 permit 10
set tag 22
!
BGP and OSPF support:
- matching on tags when redistribing routes from the RIB into BGP/OSPF.
- setting tags when redistribing routes from the RIB into BGP/OSPF.
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Signed-off-by: Piotr Chytla <pch@packetconsulting.pl>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
commit eefddcc78abcc91d1d88633a3c6d5a438fe58790
Author: Piotr Chytła <pch@packetconsulting.pl>
Date: Tue Dec 1 09:48:02 2015 -0500
bgpd, lib, ospfd, zebra: Add ability to read/write tag value
Modify zebra to pass the tag value to and from the
various protocols.
[forward ported by Cumulus]
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Signed-off-by: Piotr Chytla <pch@packetconsulting.pl>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Edits: Paul Jakma <paul.jakma@hpe.com> rebase conflicts in bgp_zebra.c
commit de24f82d0ea7eadd0db7d5c0d340a0579312237c
Author: Piotr Chytła <pch@packetconsulting.pl>
Date: Thu Jun 28 00:09:28 2007 +0200
zebra: Add internal support for route tags
Add internal support for a route tag to be applied to routes.
At this point in time, tags are not being used.
[forward ported by Cumulus]
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Signed-off-by: Piotr Chytła <pch@packetconsulting.pl>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Edited-by: Paul Jakma <paul.jakma@hpe.com> - rebase conflicts
commit 147a812ed15e171d1db882ac96f0f15723bf8b8f
Author: Donald Sharp <sharpd@cumulusnetworks.com>
Date: Thu May 21 16:06:21 2015 -0700
vtysh: service integrated-vtysh-config not being written to file
The vtysh commands:
service integrated-vtysh-config
hostname XXXX
were not being written to the /etc/quagga/Quagga.conf file with a wr mem
when service integrated-vtysh-config was issued. This patch fixes this
issue
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
commit 768d9098a526841d22a8f0b740a919bd6eccee47
Author: Dinesh Dutt <ddutt@cumulusnetworks.com>
Date: Tue May 19 18:04:13 2015 -0700
zebra: Suppress displaying default config as part of running config
Quagga doesn't display default config as part of the running config, only
what is different from the default. However, in the case of rtadv, every
link displays the default "ipv6 nd suppress-ra" as part of running config.
This patch fixes that.
Signed-off-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
commit d8c5f27777051b3ea32f8b5979ecd9bb7b9475b9
Author: Donald Sharp <sharpd@cumulusnetworks.com>
Date: Wed Mar 16 08:10:56 2016 -0400
bgpd: flag paths for multipath if we RX link-local and global nexthops
Paths with global and link-local nexthops should be considered for multipath
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
commit 743219e9abe79e8a3828fc00de679098061960bb
Author: Daniel Walton <dwalton@cumulusnetworks.com>
Date: Tue May 19 18:03:57 2015 -0700
ospfd: "show ip ospf neighbor" header spacing
The column headers for displaying OSPF neighbors are not aligned,
this patch addresses this issue
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
commit fa2e78677bde6926dc7cfa29e14925eb6d8e87b3
Author: Vivek Venkatraman <vivek@cumulusnetworks.com>
Date: Tue May 19 18:03:54 2015 -0700
bgpd: Make source interface selection in BGP for nexthop determination more robust
Ensure that if 'update-source <interface>' is specified, that interface is
chosen as the source for the local nexthops. Otherwise, do a complete
match on the local IP address of the connection to determine the source
interface for the local nexthops; this will handle scenarios where there
is an overlap of subnets between interfaces (e.g., loopback and another
interface).
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
commit 7d39125ea4d54624a4865dd272df5041ccac655e
Author: Vipin Kumar <vipin@cumulusnetworks.com>
Date: Tue May 19 18:03:53 2015 -0700
ospf6d: Adding the initialization check in ospfv3_clean()
This is to avoid a crash triggered by process termination
when ospf6d daemon is running and 'router ospf6' config has not been done yet.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
commit 8c075ef01d64cba7dd52bdc642ccee22a8538b62
Author: Vipin Kumar <vipin@cumulusnetworks.com>
Date: Tue May 19 18:03:53 2015 -0700
ospf6d: Fixing a couple of issues with ospf6_route_remove () routine.
When a route_node has multiple ospf6_routes under it (common subnet case),
then the current implementation has an issue in adjusting the route_node->info
on a ospf6_route_remove() call.
The main reason is that it ends up using exact match to determine if the next
ospf6_route belongs to the same route_node or not. Fixing that part to use
rnode (the existing back-pointer to the route_node) from the ospf6_route to
determine that.
Also fixing some of the walks to turn them safe so that the route deletion is
fine.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
commit f1b9611821bb73b6bc664afa263cdaa851e09d34
Author: Vipin Kumar <vipin@cumulusnetworks.com>
Date: Tue May 19 18:03:51 2015 -0700
ospf6d: LA (local-address) bit related inter-op fix.
As per the RFC, when the NU bit is set, prefix should be ignored.
However, the code is currently ignoring prefix with LA bit too.
Fixing that part.
In future, we should also set LA bit for the loopback addresses. Not doing this
part right away, as quagga wont be backward compatible with its own previous
releases. Maybe after a release or so, we should start setting LA bit too.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
commit f687b62b14dd4e79528e9ba607da1ebdc44cf28d
Author: Dinesh Dutt <ddutt@cumulusnetworks.com>
Date: Tue May 19 18:03:50 2015 -0700
ospfd: Don't wait for state change to Exchange to start LSReq
ANVL test 17.5. The current implementation wouldn't start sending LSReq unti
the DB Desc packets have all been received (no M bit). This caused the test
choke up. RFC 2328 allows for sending LSReq on receiving the first DbDesc
packet as long as the nbr state is Exchange. This patch fixes that.
Signed-off-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
Edited-by: Paul Jakma <paul.jakma@hpe.com> to start the sending of LsReq
from the nsm_negotiation_done FSM transition function for ExStart->Exchange,
rather than tacking the call to ospf_ls_req_send to the bottom of the DD
desc processing function.
commit 24521e24c739b130c247e864d22b734daa4281d1
Author: Daniel Walton <dwalton@cumulusnetworks.com>
Date: Tue May 19 18:03:48 2015 -0700
ospfd: Fix no ip ospf hello-interval
OSPF silently ignores 'no ip ospf hello-interval X' and 'no ip ospf hello-interval X'
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
commit 45af55a70379da6e1534185ffa20238aa6026d52
Author: Vipin Kumar <vipin@cumulusnetworks.com>
Date: Tue May 19 18:03:43 2015 -0700
ospfd: Make destination of p2p to multicast for LS-ACKS
ISSUE:
LSAcks (for directed acks) are being sent to neighbor's unicast address.
RFC 2328 says:
"The IP destination address for the packet is selected as
follows. On physical point-to-point networks, the IP
destination is always set to the address AllSPFRouters"
Fix is to unconditionally set the destination address for LSAcks over
point-to-point links as AllSPFRouters. Quagga OSPF already has similar
change for OSPF DBD, LSUpdate and LSrequest packets.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
commit e2a0ebf26c640822c3488e6f371a043a91fdcc1b
Author: Daniel Walton <dwalton@cumulusnetworks.com>
Date: Tue May 19 18:03:43 2015 -0700
bgpd: Display BGP paths with unreachable nexthops as invalid
If a BGP path has an unreachable nexthop display that path as invalid
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
commit 69424be09ccf7233b184b89bb7bd6e98f72d252b
Author: Daniel Walton <dwalton@cumulusnetworks.com>
Date: Tue May 19 18:03:41 2015 -0700
ospf6d: We should accept long form of "no redistribute"
When turning off redistribution in ospf6, allow the
user to specify the full form of the command entered.
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
commit f972dec83308986082b04711c8915e13c0a5e1c1
Author: Vipin Kumar <vipin@cumulusnetworks.com>
Date: Tue May 19 18:03:41 2015 -0700
ospf6d: Add the missing ospf6 running check in show cmds
SYMPTOM:
If some of the ospfv3 commands like 'show ipv6 ospf6 route' are executed
with ospf6d daemon running but before having any ospfv3 configuration, then
ospf6d crash is seen.
ISSUE:
There are a few show commands, which are (unlike others) not checking if
ospf6 instance is initialized already.
FIX:
Add the missing checks, by using OSPF6_CMD_CHECK_RUNNING() in the commands
where its needed and not yet used.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Reviewed-by: Pradosh Mohapatra <pmohapat@cumulusnetworks.com>
Dinesh Dutt <ddutt@cumulusnetworks.com>
commit e87f8083ff677b569048ce7560169b64daee0c57
Author: Vipin Kumar <vipin@cumulusnetworks.com>
Date: Tue May 19 18:03:40 2015 -0700
ospf6d: Support for 'clear ipv6 ospf6 interface [ifname]
Clear interface commands for ospfv3. Allow the user
to clear all peers out the specified interface.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
commit e509af86e3579944b7cde942ca3ee3427db1936a
Author: Vipin Kumar <vipin@cumulusnetworks.com>
Date: Tue May 19 18:03:40 2015 -0700
opsf6d: Update router-LSA when nbr's interface-ID changes
This is a fix to make sure router-LSA is updated when neighbor's interface
ID change is received in hello packet.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
commit a90dc8752723ef6bad6fc5a7d5180ab313b0317c
Author: Vipin Kumar <vipin@cumulusnetworks.com>
Date: Tue May 19 17:58:13 2015 -0700
ospfd: Support for 'clear ip ospf interface [IFNAME]'
Allow the user to enter the 'clear ip ospf interface [IFNAME]' command
this resets the connection between ospf and any peers out the
specified interface.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
commit 59fe0eecd3498f28ec1b1cdb2de5dcc7c507f83f
Author: Daniel Walton <dwalton@cumulusnetworks.com>
Date: Tue May 19 17:58:11 2015 -0700
bgpd: Add [bestpath|multipath] option to 'show ip bgp x.x.x.x'
When showing a prefix in bgp allow user to specify output
based upon the bestpath chosen, multipath information of all
information about a prefix(the default)
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
commit 325fcfb6d83c9add415e24e786035b67b00fd719
Author: Daniel Walton <dwalton@cumulusnetworks.com>
Date: Tue May 19 17:58:10 2015 -0700
bgpd: Add clear command to force a bestpath recalculation and re-advertisement of a prefix
Add these commands to bgp:
clear ip bgp prefix A.B.C.D/M
clear bgp ipv6 (unicast|multicast) prefix X:X::X:X/M
These two commands forces a bestpath calculation to happen again if
necessary to re-advertise the prefix.
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
commit 76a7280ddebd94b20c545e93d9773e7ad4db91de
Author: Daniel Walton <dwalton@cumulusnetworks.com>
Date: Tue May 19 17:47:24 2015 -0700
bgpd: Fix aggregation issues found via ANVL
There were various failures in ANVL's aggregation tests, this
patch fixes those issues found
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
commit 78243040fc60babf83ef02572ad7966ebd20192e
Author: Daniel Walton <dwalton@cumulusnetworks.com>
Date: Tue May 19 17:47:23 2015 -0700
bgpd: iBGP multipath is broken if 'bgp deterministic-med' is enabled.
AS_PATH comparison is broken if CONFED_AS_SEQ are present.
This patch fixes this issue
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
commit d0aa6e8b222f44949b0a190d8ff70d90333b775c
Author: Daniel Walton <dwalton@cumulusnetworks.com>
Date: Fri Jun 17 14:45:42 2016 +0100
bgpd: Make aspath_highest 4-byte compatible for private AS
* bgp_aspath.h: Add BGP_AS_IS_PRIVATE macro.
* bgp_aspath.c: (aspath_highest) use said macro to also ensure 4-byte private
AS range is ignored in calculating highest public ASN.
(aspath_private_as_check) consolidate to use said macro.
Note: Extracted from 'bgpd: Add replace-as option to remove-private-as'
by paul@jakma.org.
commit 5552da8f9abd786fb76019135277003f489626d6
Author: Paul Jakma <paul.jakma@hpe.com>
Date: Fri Jun 17 11:36:59 2016 +0100
bgpd: Fix use after free in aspath_prepend with confeds
* bgp_aspath.c: (aspath_prepend) aspath_delete_confed_seq may result
in as2 being updated, and seg2 becoming invalid. E.g. if the first
segment of of as2 is confeds. However, code there after unconditionally
reads from seg2.
Reset seg2, and re-do the empty check on it.
Caught by valgrinding tools/aspathtest.
commit dcc21851aa5f284bf57ccb2b662f4ff5b5a44321
Author: Vipin Kumar <vipin@cumulusnetworks.com>
Date: Tue May 19 17:47:20 2015 -0700
bgpd: Make the private AS number check 4 byte compatible.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Reviewed-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
commit c0a4cc74ef6994f9b4e4c1351d67a55a684faf38
Author: Daniel Walton <dwalton@cumulusnetworks.com>
Date: Mon Nov 9 20:22:00 2015 -0500
bgpd: Make "no redistribute" always remove the redistribute statement
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
commit 62f936e7960a7c08f4ae42ad43726d8d6e8e949d
Author: Daniel Walton <dwalton@cumulusnetworks.com>
Date: Mon Nov 9 20:21:59 2015 -0500
ospf6d, ripd, vtysh: Fix "no set metric" for ospf6 and RIP
Allow the user to actually turn off the set metric command
in ospf6d and rip.
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
commit 92992c69afd0095b183a3b905598d194115b27a7
Author: James Li <jli@cumulusnetworks.com>
Date: Mon Nov 9 20:21:57 2015 -0500
zebra: Dissallow outside programs to delete Quagga routes
Do not allow a program outside Quagga to delete a Quagga route from the kernel.
To delete a Quagga route, do it inside Quagga.
Signed-off-by: James Li <jli@cumulusnetworks.com>
commit 083e5e2d7bc8098b92572792ab807da381db95ea
Author: Dinesh Dutt <ddutt@cumulusnetworks.com>
Date: Mon Nov 9 20:21:54 2015 -0500
bgpd, doc: Allow route-map policy modifications to also affect route reflectors.
By default, attribute modification via route-map policy out is ignored on
reflected routes. This patch provides an option to allow this modification
to occur. Once enabled, it affects all reflected routes.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
commit 5cf768a3f53029ecc482367a1ceaf7578237b06a
Author: Dinesh Dutt <ddutt@cumulusnetworks.com>
Date: Mon Nov 9 20:21:53 2015 -0500
bgpd: Support matching on local preference in route-map
This patch adds support for matching on local preference in
BGP route-map.
Signed-off-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
commit af309fa58f41457eed226d6650d0b780c053c4d8
Author: Pradosh Mohapatra <pmohapat@cumulusnetworks.com>
Date: Mon Nov 9 20:21:47 2015 -0500
bgpd: Show more meaningful outq value in 'show ip bgp summary' output.
'outq' field in 'show ip bgp sum' displays the number of formatted packets
to a peer. Since the route announcement follows an input-buffered pattern
(i.e. adj-rib-out is a separate queue of routes per peer and packets are
formatted from the routes at the time of TCP write), the outq field doesn't
show any interesting data worth watching.
The patch is to display the adj-rib-out queue depth instead.
signed-off-by: pmohapat@cumulusnetworks.com
reviewed-by: dwalton@cumulusnetworks.com
commit a4f40293db1055387d5b901fe0dbb556226b2024
Author: vivek <vivek@cumulusnetworks.com>
Date: Mon Nov 9 20:21:46 2015 -0500
vtysh: Make ipv6 unicast/multicast address-family work
In the absence of this patch, attempting to type "address-family ipv6 unicast"
would result in an "Ambiguous command" error and in the case of
"address-family ipv6 multicast", the command would silently fail, without the
prompt dropping into the address-family mode.
The cause is how the parse tree is constructed for ipv6 address family. There
was an error in extract.pl.in script and in vtysh.c files which assumed that
there was only address family ipv6 command, without unicast or multicast and
so the command was failing.
Signed-off-by: vivek <vivek@cumulusnetworks.com>
commit 0f2f7a3fa5d55e682d0739d586da021cbd43bc3c
Author: Paul Jakma <paul.jakma@hpe.com>
Date: Thu Jun 16 15:40:02 2016 +0100
*: Fix duplicate commands from view/enable node consolidation
commit 94627e670d661f95217521ef0bfba141e5e37e68
Author: Pradosh Mohapatra <pmohapat@cumulusnetworks.com>
Date: Mon Nov 9 20:21:45 2015 -0500
bgpd: Add a null check in bgp_address_del() function when connected addresses are removed.
When you flap an interface repeatedly, you can get into situations where
the code has not quite finished cleaning up before the next event happens.
Gracefully prevent a NULL dereference.
Signed-off-by: Pradosh Mohapatra <pmohapat@cumulusnetworks.com>
commit 60cc95921ae663de325ca3e76e8c05d8224986ab
Author: Pradosh Mohapatra <pmohapat@cumulusnetworks.com>
Date: Mon Nov 9 20:21:41 2015 -0500
bgpd, doc, lib, zebra: nexthop-tracking in zebra
0. Introduction
This is the design specification for next hop tracking feature in
Quagga.
1. Background
Recursive routes are of the form:
p/m --> n
[Ex: 1.1.0.0/16 --> 2.2.2.2]
where 'n' itself is resolved through another route as follows:
p2/m --> h, interface
[Ex: 2.2.2.0/24 --> 3.3.3.3, eth0]
Usually, BGP routes are recursive in nature and BGP nexthops get
resolved through an IGP route. IGP usually adds its routes pointing to
an interface (these are called non-recursive routes).
When BGP receives a recursive route from a peer, it needs to validate
the nexthop. The path is marked valid or invalid based on the
reachability status of the nexthop. Nexthop validation is also
important for BGP decision process as the metric to reach the nexthop
is a parameter to best path selection process.
As it goes with routing, this is a dynamic process. Route to the
nexthop can change. The nexthop can become unreachable or
reachable. In the current BGP implementation, the nexthop validation
is done periodically in the scanner run. The default scanner run
interval is one minute. Every minute, the scanner task walks the
entire BGP table. It checks the validity of each nexthop with Zebra
(the routing table manager) through a request and response message
exchange between BGP and Zebra process. BGP process is blocked for
that duration. The mechanism has two major drawbacks:
(1) The scanner task runs to completion. That can potentially starve
the other tasks for long periods of time, based on the BGP table
size and number of nexthops.
(2) Convergence around routing changes that affect the nexthops can be
long (around a minute with the default intervals). The interval
can be shortened to achieve faster reaction time, but it makes the
first problem worse, with the scanner task consuming most of the
CPU resources.
"Next hop tracking" feature makes this process event-driven. It
eliminates periodic nexthop validation and introduces an asynchronous
communication path between BGP and Zebra for route change notifications
that can then be acted upon.
2. Goal
Stating the obvious, the main goal is to remove the two limitations we
discussed in the previous section. The goals, in a constructive tone,
are the following:
- fairness: the scanner run should not consume an unjustly high amount
of CPU time. This should give an overall good performance and
response time to other events (route changes, session events,
IO/user interface).
- convergence: BGP must react to nexthop changes instantly and provide
sub-second convergence. This may involve diverting the routes from
one nexthop to another.
3. Overview of the changes
The changes are in both BGP and Zebra modules. The short summary is
the following:
- Zebra implements a registration mechanism by which clients can
register for next hop notification. Consequently, it maintains a
separate table, per (VRF, AF) pair, of next hops and interested
client-list per next hop.
- When the main routing table changes in Zebra, it evaluates the next
hop table: for each next hop, it checks if the route table
modifications have changed its state. If so, it notifies the
interested clients.
- BGP is one such client. It registers the next hops corresponding to
all of its received routes/paths. It also threads the paths against
each nexthop structure.
- When BGP receives a next hop notification from Zebra, it walks the
corresponding path list. It makes them valid or invalid depending
on the next hop notification. It then re-computes best path for the
corresponding destination. This may result in re-announcing those
destinations to peers.
4. Design
4.1. Modules
The core design introduces an "nht" (next hop tracking) module in BGP
and "rnh" (recursive nexthop) module in Zebra. The "nht" module
provides the following APIs:
bgp_find_or_add_nexthop() : find or add a nexthop in BGP nexthop table
bgp_find_nexthop() : find a nexthop in BGP nexthop table
bgp_parse_nexthop_update() : parse a nexthop update message coming
from zebra
The "rnh" module provides the following APIs:
zebra_add_rnh() : add a recursive nexthop
zebra_delete_rnh() : delete a recursive nexthop
zebra_lookup_rnh() : lookup a recursive nexthop
zebra_add_rnh_client() : register a client for nexthop notifications
against a recursive nexthop
zebra_remove_rnh_client(): remove the client registration for a
recursive nexthop
zebra_evaluate_rnh_table(): (re)evaluate the recursive nexthop table
(most probably because the main routing
table has changed).
zebra_cleanup_rnh_client(): Cleanup a client from the "rnh" module
data structures (most probably because the
client is going away).
4.2. Control flow
The next hop registration control flow is the following:
<==== BGP Process ====>|<==== Zebra Process ====>
|
receive module nht module | zserv module rnh module
----------------------------------------------------------------------
| | |
bgp_update_ | | |
main() | bgp_find_or_add_ | |
| nexthop() | |
| | |
| | zserv_nexthop_ |
| | register() |
| | | zebra_add_rnh()
| | |
The next hop notification control flow is the following:
<==== Zebra Process ====>|<==== BGP Process ====>
|
rib module rnh module | zebra module nht module
----------------------------------------------------------------------
| | |
meta_queue_ | | |
process() | zebra_evaluate_ | |
| rnh_table() | |
| | |
| | bgp_read_nexthop_ |
| | update() |
| | | bgp_parse_
| | | nexthop_update()
| | |
4.3. zclient message format
ZEBRA_NEXTHOP_REGISTER and ZEBRA_NEXTHOP_UNREGISTER messages are
encoded in the following way:
/*
* 0 1 2 3
* 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | AF | prefix len |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* . Nexthop prefix .
* . .
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* . .
* . .
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | AF | prefix len |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* . Nexthop prefix .
* . .
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*/
ZEBRA_NEXTHOP_UPDATE message is encoded as follows:
/*
* 0 1 2 3
* 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | AF | prefix len |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* . Nexthop prefix getting resolved .
* . .
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | metric |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | #nexthops |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | nexthop type |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* . resolving Nexthop details .
* . .
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* . .
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | nexthop type |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* . resolving Nexthop details .
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*/
4.4. BGP data structure
Legend:
/\ struct bgp_node: a BGP destination/route/prefix
\/
[ ] struct bgp_info: a BGP path (e.g. route received from a peer)
_
(_) struct bgp_nexthop_cache: a BGP nexthop
/\ NULL
\/--+ ^
| :
+--[ ]--[ ]--[ ]--> NULL
/\ :
\/--+ :
| :
+--[ ]--[ ]--> NULL
:
_ :
(_).............
4.5. Zebra data structure
rnh table:
O
/ \
O O
/ \
O O
struct rnh
{
u_char flags;
struct rib *state;
struct list *client_list;
struct route_node *node;
};
5. User interface changes
quagga# show ip nht
3.3.3.3
resolved via kernel
via 11.0.0.6, swp1
Client list: bgp(fd 12)
11.0.0.10
resolved via connected
is directly connected, swp2
Client list: bgp(fd 12)
11.0.0.18
resolved via connected
is directly connected, swp4
Client list: bgp(fd 12)
11.11.11.11
resolved via kernel
via 10.0.1.2, eth0
Client list: bgp(fd 12)
quagga# show ip bgp nexthop
Current BGP nexthop cache:
3.3.3.3 valid [IGP metric 0], #paths 3
Last update: Wed Oct 16 04:43:49 2013
11.0.0.10 valid [IGP metric 1], #paths 1
Last update: Wed Oct 16 04:43:51 2013
11.0.0.18 valid [IGP metric 1], #paths 2
Last update: Wed Oct 16 04:43:47 2013
11.11.11.11 valid [IGP metric 0], #paths 1
Last update: Wed Oct 16 04:43:47 2013
quagga# show ipv6 nht
quagga# show ip bgp nexthop detail
quagga# debug bgp nht
quagga# debug zebra nht
6. Sample test cases
r2----r3
/ \ /
r1----r4
- Verify that a change in IGP cost triggers NHT
+ shutdown the r1-r4 and r2-r4 links
+ no shut the r1-r4 and r2-r4 links and wait for OSPF to come back
up
+ We should be back to the original nexthop via r4 now
- Verify that a NH becoming unreachable triggers NHT
+ Shutdown all links to r4
- Verify that a NH becoming reachable triggers NHT
+ no shut all links to r4
7. Future work
- route-policy for next hop validation (e.g. ignore default route)
- damping for rapid next hop changes
- prioritized handling of nexthop changes ((un)reachability vs. metric
changes)
- handling recursion loop, e.g.
11.11.11.11/32 -> 12.12.12.12
12.12.12.12/32 -> 11.11.11.11
11.0.0.0/8 -> <interface>
- better statistics
Addresses upstream comments.
"show ip bgp nexthop detail" couldn't display multiple NHs due to a bug.
Fix that.
Fix reference counts for the nexthop cache entries
Signed-off-by: Pradosh Mohapatra <pmohapat@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Signed-off-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Fix reference counts for the nexthop cache entries.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Edited-by: Paul Jakma <paul.jakma@hpe.com>
- Fix nexthop_ipv6_add defs in rib.h not having been modified with rib_ prefix.
- Remove rib_lookup_and_pushup, appears not to be used except for
!HAVE_NETLINK && HAVE_STRUCT_IFALIASREQ case of ioctl.c::if_set_prefix,
so it's not being used at all on platform with most testing of RIB.
commit 4feb0d02c029e2e4f229f6283f579b8673b0ac11
Author: Dinesh Dutt <ddutt@cumulusnetworks.com>
Date: Mon Nov 9 20:14:55 2015 -0500
bgpd: IPv6 Multipath broken with nexthop global address
IPv6 multipath is broken in BGP if nexthop contains only global address.
IPv6 always uses both nextop IPv6 address and ifIndex in sending routes down to
zebra. In cases where only the global IPv6 address is present in the nexthop
information, the existing code doesn't set the ifIndex. An example of such a
case is when a route-map isused with "set ipv6 next-hop" and only global
address is specified. This code causes the ifIndex to be determined and
set thereby fixing the multipath programming.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Reviewed-by: Shrijeet Mukherjee <shm@cumulusnetworks.com>
commit b8d1f713ba6bc91138debe9f895621b8f91a43c7
Author: Ayan Banerjee <ayan@cumulusnetworks.com>
Date: Mon Nov 9 20:14:54 2015 -0500
bgpd: Enable support for BGP IPV6 multipath.
This commit adds these two commands:
maximum-paths <1-MULTIPATH_NUM>
maximum-paths ibgp <1-MULTIPATH_NUM>
under address-family ipv6 mode. In addition adding the ability
to pass multiple paths down into zebra from bgp.
Signed-off-by: Ayan Banerjee <ayan@cumulusnetworks.com>
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Reviewed-by: Scott Feldman <sfeldma@cumulusnetworks.com>
commit 34c5d89fed6e8e91ae3cde478f1f4816d69bf09e
Author: Ayan Banerjee <ayan@cumulusnetworks.com>
Date: Mon Nov 9 20:14:53 2015 -0500
zebra: ipv6 multipath support
This patch enables support for multipath for IPV6. The nexthop information
from the protocols have ifindices and nexthop addresses in two different
structures. This patch combines them to ensure that the correct APIs can
be called. Also, given that IPV6 Linux implementation does not support the
rta_XXX APIs for multipath, the communication with the kernel is in terms
of a single nh/ifindex pair.
Signed-off-by: Ayan Banerjee <ayan@cumulusnetworks.com>
Signed-off-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
commit 6f235418ad911040c5a6252d11b05cef5984fd8e
Author: Paul Jakma <paul.jakma@hpe.com>
Date: Tue Apr 5 13:21:20 2016 +0100
zebra: *addattr should use size_t len args, quell signed v unsigned warning
commit c7c5b02480a506c6d687bf0d3a0c2a7d3e7cfbf6
Author: Paul Jakma <paul.jakma@hpe.com>
Date: Mon Apr 4 15:19:37 2016 +0100
vtysh: auto-generated vtysh_cmd.c file should depend on its creator
commit 3b847ef4e81c6f1a5d4994680d530045765fd053
Author: Paul Jakma <paul.jakma@hpe.com>
Date: Fri Apr 22 12:48:49 2016 +0100
bgpd: Squash spurious "unknown afi" log messages
* bgp_packet.c: (bgp_update_receive) doesn't differentiate between NLRIs that
are 0 AFI/SAFI cause they weren't set, and those because a peer sent a
bogus AFI/SAFI, before sending sending what may be a misleading, spurious
log message. Check the .nlri pointer is set and avoid this.
Incorporating a suggestion from: G. Paul Ziemba <unp@ziemba.us>
commit 7f39242bf44c85bb651506214666b3ebdd78b928
Author: Paul Jakma <paul.jakma@hpe.com>
Date: Wed Aug 24 15:53:36 2016 +0100
*: Remove C99ism, CI system runs builds with CFLAGS and compilers that barf
commit 23cd586eac3cde789e02c13a1236a4fe33dfc5d9
Author: Paul Jakma <paul.jakma@hpe.com>
Date: Wed Apr 6 14:03:33 2016 +0100
zebra: Update news with the status of link-detect and the global default
commit 8f4269ddff1becca94687252b9571b096cb45b43
Author: Paul Jakma <paul@jakma.org>
Date: Fri Sep 18 11:50:33 2015 +0100
zebra: Add command to configure default for link-state, and make it sticky
* Provide a way for the user to specify their own preference for the default
behaviour of link-detect, independent of the compiled in default.
Add a global "default link-detect (on|off)" command to zebra, to set
the default policy for link-detect accordingly. The command is "sticky" -
when set it will stay set and always be written out, regardless of how it
compares to the baked-in, compile-time default.
The per-interface "link-detect" command is similarly made sticky.
* zebra/interface.h: (zebra_if_linkdetect;) enum for link-detect configured
state.
(struct zebra_if_defaults) Global link-detect default
(struct zebra_if) Add field for per-iface link-detect default.
* lib/if.c: (if_create_vrf) Remove the default flag setting on if-create
here, it's a zebra flag so do it in zebra's if_zebra_new_hook
* zebra/interface.c: Add static storage for global defaults.
(if_zebra_new_hook) Set the link-detect flag on new ifaces according to the
baked in default or else the configured global default.
(config_write_zebra_if_defaults,default_linkdetect_cmd) global link-detect
command and config write out machinery.
(linkdetect_cmd) Set the configuration state rather than the flag.
The new hook will then set the interface flag when the if comes up.
(if_config_write) Write config according to configured state, not the
low-level flag.
(zebra_if_init) add new commands.
commit a6d400c9158b10207cde40a428ebf2c27f105c0a
Author: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Date: Fri Sep 18 08:32:56 2015 -0400
zebra: Set link-detect on by default
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Reviewed-by: Dinesh G Dutt <ddutt at cumulusnetworks.com>
Reviewed-by: Scott Feldman <sfeldma at cumulusnetworks.com>
Edited by Christian Franke: Fix OSPF Virtual Links
Edited by Donald Sharp: Add NEWS notification
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Acked-By: paul@jakma.org
commit 3bccb4f3df0530bb4d8961b0867ea04c1bca065f
Author: Avneesh Sachdev <avneesh@sproute.com>
Date: Fri Mar 11 12:21:26 2016 -0800
zebra: add developer test functions for FPM code
Add test functions for the zebra code that interfaces with the
Forwarding Plane Manager. These functions can be invoked in a
development build via the recently-added 'invoke' command.
For example:
# invoke zebra function zfpm_dt_benchmark_protobuf_encode 100000
Changes:
* zebra/zebra_fpm_dt.c
Add the following functions. Each function encodes or decodes a
route in a particular FPM format a specified number of times.
- zfpm_dt_benchmark_netlink_encode()
- zfpm_dt_benchmark_protobuf_encode()
- zfpm_dt_benchmark_protobuf_decode()
* zebra/Makefile.am
Compile zebra_fpm_dt when building a development build.
Signed-off-by: Avneesh Sachdev <avneesh@sproute.com>
commit 7e4025cb65f79d584911042d3e19eee787b9115b
Author: Avneesh Sachdev <avneesh@sproute.com>
Date: Fri Mar 11 12:21:24 2016 -0800
build: support for "development build"
* configure.ac
Add the --enable-dev-build flag. It controls the DEV_BUILD
define for autoconf and automake, which can be used to
conditionally build in code that is only intended for development..
Signed-off-by: Avneesh Sachdev <avneesh@sproute.com>
commit 6112d11a978af54f87ac55daa9e965d949cb0041
Author: Avneesh Sachdev <avneesh@sproute.com>
Date: Mon Apr 4 10:54:59 2016 -0700
doc: add blurb on use of protobuf with FPM
Add text about using protobuf as an alternative format for the FPM
interface.
Signed-off-by: Avneesh Sachdev <avneesh@sproute.com>
commit 5779fda137803a4b1e534f6ba70781681baf3fda
Author: Avneesh Sachdev <avneesh@sproute.com>
Date: Mon Apr 4 10:54:58 2016 -0700
zebra: optionally use protobuf with FPM
Change zebra so that it can optionally use protobuf serialization when
communicating with a Forwarding Plane Manager component.
* zebra/main.c
Add the --fpm-format/-F command line option. This allows the user
to control the format (protbuf|netlink) that is used to
communicate with the FPM.
* zebra/zebra_fpm.c
- zebra_init_msg_format(),
This new function is invoked on process startup to determine the
FPM format that should be used.
- zfpm_init()
Change to accept any 'FPM message format' specified by the user
(via the new command line flag).
- zebra_encode_route()
Tweak to use the selected FPM format.
* zebra_fpm_protobuf.c
New code to build protobuf messages to be sent to the FPM.
* zebra/Makefile.am
- Include common.am
- Build new file zebra_fpm_protobuf.c when protobuf is available.
- Link with the fpm_pb library.
Signed-off-by: Avneesh Sachdev <avneesh@sproute.com>
commit b8ae330cd3c65808044d344b24f0917b312c4fb9
Author: Avneesh Sachdev <avneesh@sproute.com>
Date: Thu Jul 14 09:59:30 2016 -0700
Use only the ISC license for .proto files.
Simplify licensing for protobuf files based on discussion on the
quagga-dev mailing list.
Previously, users could choose between the GPL and the ISC license.
Signed-off-by: Avneesh Sachdev <avneesh@sproute.com>
Signed-off-by: Avneesh Sachdev <avneesh@sproute.com>
commit ef20ef7de9fe52931e7a5ce07b8228e87f7f52b6
Author: Avneesh Sachdev <avneesh@sproute.com>
Date: Mon Apr 4 10:54:57 2016 -0700
fpm: Add protobuf support for FPM.
Code that allows a client to convey routes to a Forwarding Plane
Manager component using protobuf instead of netlink..
* fpm/fpm.proto
Protobuf definitions pertaining to the Forwarding Plane Manager.
In particular, this file defines the AddRoute and DeleteRoute
messages.
* fpm/fpm.h
Tweak FPM message header definition to also allow messages to be
encoded in protobuf format.
* fpm/{fpm_pb.h,.gitignore,.Makefile.am}
Add the fpm_pb library, which contains code for interfacing with
the FPM using protobuf.
* configure.ac
Generate fpm/Makefile.
* Makefile.am
Add fpm subdirectory to build.
* common.am
Add flags to be used by clients of the fpm_pb library.
Signed-off-by: Avneesh Sachdev <avneesh@sproute.com>
commit b2624487659d8148ca253147fd7e63560a439c8b
Author: Avneesh Sachdev <avneesh@sproute.com>
Date: Mon Apr 4 10:54:56 2016 -0700
build: turn off automake portability warnings
Modify configure.ac to disable portability warnings for automake --
our automake code (in particular common.am) uses some constructs
specific to gmake.
Signed-off-by: Avneesh Sachdev <avneesh@sproute.com>
commit 07e5b645059167a37ccf1079a125114339c0df9e
Author: Avneesh Sachdev <avneesh@sproute.com>
Date: Mon Apr 4 10:54:55 2016 -0700
qpb: Add support for protobuf.
Infrastructure that allows protocol buffers to be used in Quagga. The
changes below comprise of:
- Build hooks
- Protobuf definitions for common types.
- Library routines for working with protobuf, including functions
that help translate between common quagga types and their protobuf
equivalents.
Changes:
* qpb/{Makefile.am,README.txt,qpb.h,.gitignore}
Add the qpb library, which provides shared code and definitions
for using protocol buffers in quagga code.
* qpb/qpb.proto
Protobuf definitions that can be shared by all of quagga.
* qpb/linear_allocator.h
An allocator that allocates memory by walking down towards the end
of a buffer. This is used to cheaply allocate/deallocate memory on
the stack for protobuf operations.
* qpb/qpb_allocator.[ch]
Thin layer that allows a linear allocator to be used with the
protobuf-c library.
* common.am
This is an automake fragment that is intended to be shared by
Makefile.am files in the tree. It currently includes definitions
related to protobuf.
* configure.ac
- Add logic to optionally build protobuf code.
By default, protobuf support is enabled if the protobuf C
compiler (protoc-c) is available, and the associated header
files/library can be found.
The user can choose to override this behavior via the new
--disable-protobuf/--enable-protobuf flags.
- Include the quagga protobuf library (qpb) in the build.
* .gitignore
Ignore source code generated by protobuf compiler.
* Makefile.am
Add 'qpb' to the list of subdirectories.
Signed-off-by: Avneesh Sachdev <avneesh@sproute.com>
Edited: Paul Jakma <paul.jakma@hpe.com>: Change the sense of the
configure enable option to require explicit specifying, as
an experimental feature.
commit cbd976b54d51fea2f3d532e8d5aac66d6294acc2
Author: Paul Jakma <paul@jakma.org>
Date: Fri Feb 26 10:34:01 2016 +0000
HACKING: Document how to add standard copyright claims to files
* (REQUIRED READING) Copyright claims may be documented in the standard way,
with a "Copyright ..." line near the beginning of the file.
Incorporating suggestions and refinements from:
Lou Berger <lberger@labn.net>
commit 57439bf2dd0e2aa9c5a4c95919503dae1e360a19
Author: Paul Jakma <paul.jakma@hpe.com>
Date: Fri Feb 5 14:46:58 2016 +0000
HACKING: New code _MUST_ use a bounded-buffer in handling untrusted data.
* Guidelines: New code must use a bounded-buffer abstraction that provides
at least some level of sanity checks on accesses. Direct pointer
twiddling based on untrustable buffers is not generally acceptable in new
code in Quagga.
Tested-by: NetDEF CI System <cisystem@netdef.org>
commit d1aa80f04d12c096b10ba0862edbe6c30b5f7ebb
Author: Paul Jakma <paul@jakma.org>
Date: Tue Jan 26 14:00:12 2016 +0000
HACKING: Note that "Signed-off-by" not used for authorship/rights info
* "Signed-off-by" is overloaded, and possibly not even well understood.
As per the text, it should not be used to indicate authorship or other
rights information, within Quagga.
commit d3cf6c689a64ab83ba574e7df2472129603f1875
Author: Paul Jakma <paul@jakma.org>
Date: Tue Jan 26 14:00:11 2016 +0000
HACKING: Add required reading section & commit should give full rights details
* HACKING.tex: (COMMIT MESSAGES) It's pretty critical that commit messages
give all the detail required to figure out what authorship/copyright
claims might come into play.
(REQUIRED READING) Add a section on what people are implicitly agreeing to
when they contribute. It's fairly obvious, common sense stuff. Spell it
out though. Note that COMMIT MESSAGES are also required reading.
(Cover page) Draw attention to REQUIRED READING.
A previous version was:
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
commit 2f6aa36e8d72d712738fad2c53ab95f7fcbefc61
Author: Paul Jakma <paul@jakma.org>
Date: Tue Jan 26 14:00:10 2016 +0000
HACKING: Fix internal section links
Seems when pandoc converts tex to markdown it doesn't output internal
reference links in a format it recognises itself. Fix.
commit 3affb6c04881f99aafbbb12de76bdde1dbea0408
Author: Paul Jakma <paul@jakma.org>
Date: Tue Jan 26 14:34:41 2016 +0000
HACKING: Update HACKING with anything relevant from pending and prune
* HACKING.md: Add USEFUL URLs section, add link to patchwork
* HACKING.pending: Prune out stuff moved to HACKING or well out of date or
unreachable.
Tested-by: NetDEF CI System <cisystem@netdef.org>
commit f458d88e57e982e8f00a3d2db35a2c6e0bb331fa
Author: David Lamparter <equinox@opensourcerouting.org>
Date: Tue May 24 18:58:09 2016 +0200
bgpd: ditch unused bgp_node_*() functions
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Tested-by: NetDEF CI System <cisystem@netdef.org>
commit 584083d50511e19b228cce1e4a1cbcb28fae6b49
Author: David Lamparter <equinox@opensourcerouting.org>
Date: Tue May 24 18:58:08 2016 +0200
bgpd: divorce router-id logic from CLI & zebra
Logic for determining the router-id was spread out over bgp_zebra.c and
bgp_vty.c. Move to bgpd/bgpd.c and have these two call more properly
encapsulated functions.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
commit dfb9bd7aaadc2f5abb9bc9aecbd73b9d8b3a788c
Author: David Lamparter <equinox@opensourcerouting.org>
Date: Tue May 24 18:58:07 2016 +0200
bgpd: minor header/API clean up
Adds "const" on:
- peer_update_source_addr_set()
- peer_description_set()
Adds parameter names on:
- bgp_timers_set()
(really confusing, this one, with 2 unexplained args of same type)
Adds new setter:
- peer_afc_set(), calling peer_activate/peer_deactivate.
(intended for API consumers, matches peer->afc)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
commit 4afa3ddd17464ecce91b6ed9df27b1231fb3e939
Author: Philippe Guibert <philippe.guibert@6wind.com>
Date: Tue May 24 16:52:02 2016 +0200
bgpd: Add new configuration cli for graceful restart.
There is support to configure graceful restart timer. This is the
time to wait to delete stale routes before a BGP open message is
received.
bgp graceful-restart restart-time <1-3600>
no bgp graceful-restart [<1-255>]
* bgpd/bgp_vty.c
* Define command strings for above CLI
* bgpd/bgpd.c
* bgp_config_write(): Output graceful restart-time configuration
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Tested-by: NetDEF CI System <cisystem@netdef.org>
commit d83b8d6d73021815a87e000c50863a105af80226
Author: Lou Berger <lberger@labn.net>
Date: Tue May 17 07:10:41 2016 -0400
lib: add AF_ETHERNET/AFI_ETHER
commit ee5fbe26f2b7561457a1d0c8b5ce72b512638cb0
Author: Lou Berger <lberger@labn.net>
Date: Tue May 17 07:10:38 2016 -0400
lib: dump memory stats on core
commit b8cb7c3fd44cfd0781a5e80a369ecb19eee9a4a7
Author: Lou Berger <lberger@labn.net>
Date: Tue May 17 07:10:33 2016 -0400
lib: fix memory leak in zprivs_caps_init
commit 93b493a2b010df4f67c7173c0928c8f86d9e1aa2
Author: Igor Ryzhov <iryzhov@nfware.com>
Date: Wed May 11 15:26:39 2016 +0300
bgpd: fix wrong help strings of "match peer" and "no match peer" commands
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Tested-by: NetDEF CI System <cisystem@netdef.org>
commit 49c370b74df11832239408f68119bd0a0a19a6e8
Author: Colin Petrie <cpetrie@ripe.net>
Date: Wed May 11 11:56:58 2016 +0200
bgpd: fix MRT table dumps for locally-originated routes
I've been working on a small patch to correct an issue in the BGP MRT
table dump code. It's a quick'n'easy fix initially, and I'd appreciate
any feedback on making it better :)
Issue:
When the BGP table dump code runs, it generates the peer_index_table.
This walks the list of peers, and dumps out their IP, ASN, address
family, etc. It also sets the peer index number in the peer struct.
Then the code walks the RIB, and for each prefix, writes out RIB
entries, that refer to the peer index number.
However, when it finds prefixes that are locally originated, the
associated peer is the 'self' peer, which wasn't in the list of peers,
never gets an index number assigned, but because it is calloc'd, the
index number is set to 0.
End result: locally-originated routes are associated with whichever peer
happens to be first in the list of remote peers in the index table :)
Example (from one of our route collectors) - these are two of our
originated prefixes (bgpdump output):
TABLE_DUMP2|1457568002|B|12.0.1.63|7018|84.205.80.0/24||IGP|193.0.4.28|0|0||NAG|64512
10.255.255.255|
TABLE_DUMP2|1457568006|B|12.0.1.63|7018|2001:7fb:ff00::/48||IGP|::|0|0||NAG||
The prefixes are announced by us (note it has an empty AS PATH (the
field after the prefix)) but also looks like it was received from AS7018
(12.0.1.63). In fact, the AS7018 peer just happens to be the first peer
in the index table.
Fix:
The simplest fix (which is also the method adopted by both OpenBGPd and
the BIRD mrtdump branch) is to create an empty placeholder 'peer' at the
start of the peer index table, for all the routes which are locally
originated to refer to.
I've attached a patch for this.
Here's a resulting bgpdump output after the patch:
TABLE_DUMP2|1458828539|B|0.0.0.0|0|93.175.150.0/24||IGP|0.0.0.0|0|0||NAG||
Now it is more obvious that the prefix is locally originated.
There are more complicated potential ways of fixing it
1) skip the local routes when dumping the RIB. This leads to questions
about what an MRT table dump *should* contain :)
2) include the 'self' peer in the list of peers used to generate the
index table.
etc etc.
But I'm quite happy with my 'create a fake peer, and associate local
routes with it' method :)
Your thoughts and feedback are welcome!
Regards,
Colin Petrie
Systems Engineer
RIPE NCC RIS Project
Tested-by: NetDEF CI System <cisystem@netdef.org>
commit 06de82eaeb11a1c84798cc222af77cdb07af2e4e
Author: Jafar Al-Gharaibeh <jafar@atcorp.com>
Date: Mon May 9 15:18:56 2016 -0500
pimd: send pim prune via correct interface when rpf upstream interface for a source changes
When the rpf upstream interface for a joined source changes, a prune was
being sent out the new rpf upstream interface that was intended for the old
upstream router. The prune should be sent out the old rpf upstream
interface so that the old route for the multicast source is pruned.
Reviewed-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
Signed-off-by: Taylor Bouvin <tbouvin@atcorp.com>
Tested-by: NetDEF CI System <cisystem@netdef.org>
commit 220355df533f9c127c32de296513fae180c1568d
Author: Andrej Ota <andrej@ota.si>
Date: Mon May 9 20:49:01 2016 +0200
bgpd: fix BGP IPv6 route map error
BGP refactoring in commit f3cfc46450cccc5ac035a5a97c5a1a5484205705
introduced an error which broke route map processing for IPv6 where
AFI_IP was used instead of AFI_IP6.
This patch fixes the typo.
Signed-off-by: Andrej Ota <andrej@ota.si>
Tested-by: NetDEF CI System <cisystem@netdef.org>
commit 0ffd69a9bf58ab2e0105336f10753293230a4360
Author: Paul Jakma <paul.jakma@hpe.com>
Date: Wed Aug 3 15:22:39 2016 +0100
doc: Add isisd.texi to quagga_TEXINFOS so it gets in dist tarball
commit 3676cb0c029c8f8f06ab703dd441c1e23e5ef333
Author: Paul Jakma <paul.jakma@hpe.com>
Date: Fri Jul 29 13:39:37 2016 +0100
*: Remove some for statement declarations
We generally require C99. Some compilers, e.g. gcc, barf on
'for' statement declared variables, if std={gnu,c}99 or higher is not
given - even while seemingly accepting other C99 constructs.
As it's trivial, remove these.
commit 481986950290323e2f5d1e774a666d4b7ed510d6
Author: Olivier Dugeon <olivier.dugeon@orange.com>
Date: Tue Apr 19 19:21:17 2016 +0200
ospfd: Add support Router Capabilities support to OSPF
This is an implementation of RFC4970 (Router Information) and
RFC5088 (PCE Capabilities announcement)
* ospfd/Makefile.am: Add new file ospf_ri.c and ospf_ri.h
* ospfd/ospf_opaque.c: Add new Router Capabilities code point
* ospfd/ospf_ri.[c,h]: Implementation of RFC4970 & RFC5088
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
commit ec04b9faf9ec55ccf7d5bb16cf17a85051fc8270
Author: Olivier Dugeon <olivier.dugeon@orange.com>
Date: Tue Apr 19 19:18:18 2016 +0200
doc: Update documentation for Traffic Engineering
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
commit 4f593574c41deb598cbbefde5c6d938799e81d5a
Author: Olivier Dugeon <olivier.dugeon@orange.com>
Date: Tue Apr 19 19:03:05 2016 +0200
isisd: Add support of Traffic Engineering
These patches is an implementation of RFC5305 that enable the
support of Traffic Engineering in IS-IS
* isisd/Makefile.am: Add new files isis_te.c and isis_te.h
* isisd/isis_circuit.[c,h]: Add new mpls_te_circuit structure to
isis_circuit structure to handle new Traffic Engineering TLVs
* isisd/isis_lsp.c: Update LSP handler to mux/demux Traffic Engineering TLVs
* isisd/isis_main.c: Add initialisation of ISIS TE
* isisd/isis_pdu.c: Update function process_p2p_hello() to retrieve remote
IP address to populate Traffic Engineering TLV.
* isisd/isis_te.[c,]: Implementation of RFC5305
* isisd/isis_tlv.[c,h]: Update TLV definition and function to handle
Traffic Engineering ones
* isisd/isis_zebra.c: Add new function isis_zebra_link_params() to retrieve
the link parameters of interfaces from ZBus to populate the Traffic
Engineering TLVs
* isisd/isisd.[c,h]: Add Traffic Engineering support with new debug command
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
commit 29a1401706a762541b366c7844507efe2bc1345d
Author: Olivier Dugeon <olivier.dugeon@orange.com>
Date: Tue Apr 19 18:42:40 2016 +0200
ospfd: Update Traffic Engineering support
These patches update original code to RFC3630 (OSPF-TE) and add support of
RFC5392 (Inter-AS v2) & RFC7471 (TE metric extensions) and partial support
of RFC6827 (ASON - GMPLS).
* ospfd/ospf_dump.[c,h]: Add new dump functions for Traffic Engineering
* ospfd/ospf_opaque.[c,h]: Add new TLV code points for RFC5392
* ospfd/ospf_packet.c: Update checking of OSPF_OPTION
* ospfd/ospf_vty.[c,h]: Update ospf_str2area_id
* ospfd/ospf_zebra.c: Add new function ospf_interface_link_params() to get
Link Parameters information from the interface to populate Traffic
Engineering metrics
* ospfd/ospfd.[c,h]: Update OSPF_OPTION flags (T -> MT and new DN)
* ospfd/ospf_te.[c,h]: Major modifications to update the code to new
link parameters structure and new RFCs
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
commit ac10d30c03091eace3c0405aa8ccb7d3c09e7bd2
Author: Olivier Dugeon <olivier.dugeon@orange.com>
Date: Tue Apr 19 18:33:42 2016 +0200
vtysh: Add support of new link-params CLI
In vtysh_config.c/vtysh_config_parse_line(), it is not possible to continue
to use the ordered version for adding line i.e. config_add_line_uniq() to print
Interface CLI commands as it completely break the new LINK_PARAMS_NODE.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
commit 15773a87ce652da5b02ca14dc0088408899ea007
Author: Olivier Dugeon <olivier.dugeon@orange.com>
Date: Tue Apr 19 18:29:55 2016 +0200
zebra: Add link parameters support to Zebra
* zebra/interface.c:
- Add new link-params CLI commands
- Add new functions to set/get link parameters for interface
* zebra/redistribute.[c,h]: Add new function to propagate link parameters
to routing daemon (essentially OSPFD and ISISD) for Traffic Engineering.
* zebra/redistribute_null.c: Add new function
zebra_interface_parameters_update()
* zebra/zserv.[c,h]: Add new functions to send link parameters
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
commit ae51c9d510fb7d9cc41ead8803af916c1f4b34ca
Author: Olivier Dugeon <olivier.dugeon@orange.com>
Date: Tue Apr 19 16:21:46 2016 +0200
lib: Add new if_link_params structure
This new structure is the basis to get new link parameters for
Traffic Engineering from Zebra/interface layer to OSPFD and ISISD
for the support of Traffic Engineering
* lib/if.[c,h]: link parameters struture and get/set functions
* lib/command.[c,h]: creation of a new link-node
* lib/zclient.[c,h]: modification to the ZBUS message to convey the
link parameters structure
* lib/zebra.h: New ZBUS message
* lib/memtypes.c: Add new memory type for Traffic Engineering support
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
commit 7e49a4f99273858887806c6251d958e1e664bedf
Author: Paul Jakma <paul.jakma@hpe.com>
Date: Tue Aug 2 13:36:03 2016 +0100
build: Test for features.h and move include to lib/zebra.h
* configure.ac: Check for features.h, which is needed to get Clang to
define __STDC_IEC_559__.
* lib/{stream.c,zebra.h}: move the features.h include to zebra.h, so
lib/network.c also gets it.
commit a3b161bb72d7fdb58e79afd0f706849601f77fe2
Author: Paul Jakma <paul.jakma@hpe.com>
Date: Mon Aug 1 15:13:58 2016 +0100
lib: IEC559 tests are fragile, reduce to warning rather than error.
* {network,stream}.c: Weaken the compile time tests for IEEE754 / IEC-559
binary floating point format from an error to a warning when not detected.
I can't think of any platforms that are not IEEE-754 format, and as the
testing for the defines appears to be fragile (often not set) the error
just gives false positives.
Even the warnings may be too much. Those should probably be moved
to some configure test. Will do for now though, to fix compilation
on CentOS and some BSDs.
commit 4359501e1a427159c9b49f3041889837aaaf2eb3
Author: Paul Jakma <paul@opensourcerouting.org>
Date: Tue May 19 18:50:49 2015 +0100
lib: consolidate ntohf/htonf from ospfd/isisd TE to lib/network
* lib/network.{c,h}: Consolidate the ntohf/htonf functions used in ospfd
TE to here, using the value-passing variant that fits with existing
ntoh/hton functions.
* ospfd/ospf_opaque.c: Remove its variants.
* ospfd/ospf_te.c: Update to use the consolidated, by-value variant.
commit d41e7b975b901f109608471b77c46718c1fb5b45
Author: Paul Jakma <paul@opensourcerouting.org>
Date: Tue May 19 15:38:43 2015 +0100
lib/stream: add float/double <-> IEEE-754 single/double mux/demuxers
* stream.{c,h}: Add stream_get{f,d} and stream_put{f,d}) demux and muxers to
safely convert between big-endian IEEE-754 single and double binary
format, as used in IETF RFCs, and C99. Implementation depends on host
using __STDC_IEC_559__, which should be everything we care about. Should
correctly error out otherwise.
Thanks to Aidan Delaney <aidan@phoric.eu> and Olivier Dugeon for pointing
out the __STDC_IEC_559__ macro.
Update: GCC does not per se set __STDC_IEC_559__, so also test for
__GCC_IEC_559 >= 1.
commit 581ecbfe91d23791c116a8e3790208a17c1a5983
Author: Christian Franke <nobody@nowhere.ws>
Date: Tue May 3 19:59:43 2016 +0200
zebra: count iface up/down events and keep last time of their occurrence
It is quite useful to be able to assert whether specific interfaces have
flapped or also to verify that specific interfaces have not flapped.
By having counters for those events and storing the last time of their
occurrence, this is made possible.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Tested-by: NetDEF CI System <cisystem@netdef.org>
commit 00667cea1fbd088900f7909f2044da2a7e26270d
Author: Christian Franke <nobody@nowhere.ws>
Date: Tue May 3 19:59:42 2016 +0200
lib: add event_counter
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
commit 880e31ca2d8a8a8fcbc28bfeac9bd13fc76dd2c1
Author: Christian Franke <nobody@nowhere.ws>
Date: Tue May 3 19:59:40 2016 +0200
lib: use constant to replace magic value for length of quagga_timestamp
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
commit 2ab67a7591d7693bb726dd82795017c8c3f52d99
Author: Pawel Wieczorkiewicz <pwieczorkiewicz@suse.de>
Date: Fri Apr 1 12:54:38 2016 +0200
build: detect and create AM_SILENT_RULES macro if needed
Older libs have problem with that:
configure.ac:17: warning: macro `AM_SILENT_RULES'
not found in library
...
configure.ac:24: error: possibly undefined macro:
AM_SILENT_RULES
Tested-by: NetDEF CI System <cisystem@netdef.org>
commit 811577eaede8b6a7ea6ba3731c82eed1c4d07500
Author: Donald Sharp <sharpd@cumulusnetworks.com>
Date: Thu Mar 10 20:16:48 2016 -0500
lib: Remove unnecessary parentheses
The freebsd compiler complains that there is an extra set of ()'s
around the if statement.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
commit 985c3556921fa669f86fe5e62130fbeb93d94ca9
Author: Donald Sharp <sharpd@cumulusnetworks.com>
Date: Thu Mar 10 20:16:47 2016 -0500
bgpd: Fix code path that leads to uninitialized variables
subtype and sublength are not initialized and if on Line 1877
BGP_ATTR_ENCAP != type we will not set subtype and sublength,
but these variables are used immediately below that if statement.
This issue was discovered via the freebsd compiler.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
commit 54406ac4c6883725f8a337bdc4f15fb015926b0f
Author: Donald Sharp <sharpd@cumulusnetworks.com>
Date: Fri Mar 4 15:28:57 2016 -0500
lib: Refactor thread_process_fd
thread_process_fd is looping over the read and write
fd's separately. There is no need to do this individually.
loop over both the read and write fdset's at the same time.
This will improve select processing performance, especially
for large data sets.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
commit 1ad00b07a10eb8b3f5c94348488735fb08f28717
Author: Donald Sharp <sharpd@cumulusnetworks.com>
Date: Wed Jul 13 11:02:38 2016 -0400
lib: Fix regression in thread.c
* Fix regression introduced with merging of
'lib: Refactor read/write functionality'
commit e0b8324deb490c52834775d2b805cbb57e003ce0
Author: Donald Sharp <sharpd@cumulusnetworks.com>
Date: Fri Mar 4 15:28:56 2016 -0500
lib: Refactor read/write functionality
Both the read and write functions used the same code
slightly modified for reading and writing. Combine this
code together.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Edited-by: Paul Jakma <paul.jakma@hpe.com> to retain the
external library symbols, for ease of merging.
commit 19be18a929c3afa343ac5435dba25f522e294d9b
Author: Donald Sharp <sharpd@cumulusnetworks.com>
Date: Fri Mar 4 15:28:55 2016 -0500
lib: Abstract fd set operations
Abstract FD set operations so that we can eventually
choose what type of select/poll operation that
we want to use.
Signed-off-by: Donald Sharp <sharpd@cumulusnetowkrs.com>
commit 6bcee414a487024e7865fb29d4e583870406d914
Author: David Lamparter <equinox@opensourcerouting.org>
Date: Sat Mar 12 19:58:09 2016 +0100
lib: fix MIN/MAX macros to not double-eval
cf. https://gcc.gnu.org/onlinedocs/gcc/Typeof.html
(Works on all compilers on Quagga's compiler support list in
doc/overview.texi)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Tested-by: NetDEF CI System <cisystem@netdef.org>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
commit 921936652359fe72728eb196aa9107310f02a4d4
Author: Paul Jakma <paul.jakma@hpe.com>
Date: Thu Jun 16 15:53:26 2016 +0100
lib: keep hash of node's commands to detect duplicate installs
* command.h: (struct cmd_node) Add a hash, so duplicate installs of
a cmd_element to a command node can be detected. To help catch
strays from the VIEW/ENABLE node consolidation particularly
(installs to VIEW automatically install to ENABLE too now).
* command.c: (cmd_hash_{key,cmp}) helpers for the hash - just directly
on the pointer value is sufficient to catch the main problem.
(install_node) setup the hash for the command node.
(install_element) check for duplicate installs.
The assert on the cmd_parse_format seems misplaced.
(install_default_basic) separate the basic, VIEW, node default commands
to here.
(cmd_init) get rid of dupes, given consolidation.
(cmd_terminate) clean up the node command hash.
Not done: The (struct cmd_node)'s vector could be replaced with the
cmd hash, however much of the command parser depends heavily on the
vector and it's a lot of work to change. A vector_lookup_value could
also work, particularly if vector could be backed by a hash.
The duplicate check could be disabled in releases - but useful in
development. It's a little extra overhead at startup. The command
initialisation overhead is already something that bites in
micro-benchmarks - makes it easy for other implementations to show
how much faster they are with benchmarks where other load is low
enough that startup time is a factor.
commit 41de629c1fe88f9ea95d0400af6896f3c84a0dff
Author: Christian Franke <nobody@nowhere.ws>
Date: Tue May 3 19:59:41 2016 +0200
lib: add api method to read current config path
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
commit 68b45cc592d5d61e748e8d99ec9f84e63aa73213
Author: Donald Sharp <sharpd@cumulusnetworks.com>
Date: Fri Mar 11 14:27:13 2016 -0500
*: Consolidate all double VIEW_NODE and ENABLE_NODE's
If a command is put into the VIEW_NODE, it is going into the
ENABLE_NODE as well. This is especially true for show commands.
As such if a command is in both consolidate it down to VIEW_NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
commit b9ac2f320922542e0320ceeced4aa7264564e98a
Author: Donald Sharp <sharpd@cumulusnetworks.com>
Date: Fri Mar 11 14:27:12 2016 -0500
lib: Consolidate VIEW_NODE to be ENABLE_NODE as well
If you are in VIEW_NODE, the command should exist in ENABLE_NODE
as well. This is being done to reduce chances of code being
added to one but not the other NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
commit 4ab273bb60606ed681bee1be6fb2c8bb31dc26a7
Author: Denil Vira <denil@cumulusnetworks.com>
Date: Fri Mar 4 15:28:54 2016 -0500
lib: Replace lists with arrays to store read and write threads
With arrays, a thread corresponding to given fd is looked up in constant time
versus the linear time taken for list traversals.
Signed-off-by: Denil Vira <denil@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
commit 0744040564ece3f4b9fe39fcf857e466a5f68a72
Author: Donald Sharp <sharpd@cumulusnetworks.com>
Date: Thu Feb 25 07:39:45 2016 -0500
vtysh: Add ability to only look at one processes work queue
When examining performance information it is nice to not
have to look at daemons who you are not interested in.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Tested-by: NetDEF CI System <cisystem@netdef.org>
commit 23757db11c5378521b7948847e17691f4fc35e0a
Author: David Lamparter <equinox@opensourcerouting.org>
Date: Wed Feb 24 06:26:02 2016 +0100
*: get rid of "MTYPE 0"
A few places are using 0 in place of the MTYPE_* argument. The
following rewrite of the alloc tracking won't deal with that, so let's
use MTYPE_TMP instead.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
commit 7bd31774cf2c1cfaf74bca87f57f698e20a07e65
Author: kitty <khiruthigai.balasubramanian@hpe.com>
Date: Thu Feb 18 21:33:40 2016 -0800
ospfd: fix non-zero metric when describing loopback addresses
Fixes Quagga Bugzilla #842
Change-Id: Iff33d70089d1393bf3e9c757d9e9faf134699121
Signed-off-by: kitty <khiruthigai.balasubramanian@hpe.com>
Tested-by: NetDEF CI System <cisystem@netdef.org>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
commit 47dd9af50d7fcf3ea25ebb8c8c4e9c4726a072f6
Author: David Lamparter <equinox@opensourcerouting.org>
Date: Tue Feb 16 19:50:16 2016 +0100
build/pimd: remove special shell scripts
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Tested-by: NetDEF CI System <cisystem@netdef.org>
commit 8b3ab1f1c8172ff7c77b382b6636c8e8314d7ebc
Author: David Lamparter <equinox@opensourcerouting.org>
Date: Tue Feb 16 19:50:15 2016 +0100
isisd: fix assert warning
icc (the Intel C Compiler) "knows" that assert() can be disabled by
setting specific optimisation flags, and therefore emits a warning about
missing a return value after an "always-error" assert.
Workaround by returning a value - this probably needs discussion and a
better fix (for all places where the code needs to abort due to internal
errors).
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
commit d869dbd03b4d75d512552d07ed8fbe0807272a9c
Author: Udaya Shankara KS <shankara.k.s.u@gmail.com>
Date: Thu Feb 11 21:42:29 2016 +0530
zebra: Enable fpm module to connect to remote fpm server
FPM aims to provide cross platform mechanism to support the scenario
where the router has forwarding path distinct fromt the kernel.Commonly
Hardware based fast path.Hence it is non-configurable paramter.This
limits us to use funcationality to update FIB information to remote
hosts, like SDN controller.
This implementation provides the CLI to configure remote hosts and port
information of remote fpm controller.Otherwise default fpm server will
be localhost and default fpm port will be well know port 2620.
* zebra_fpm.c: added fpm_server paramter to zfpm_global_t handler.
Implemented CLI for configuring the fpm server and no fpm
command to revert back to default configuration.
* zserv.c: Install zebra node to write fpm configuration info
on console/config file.
Further documentation supplied:
-------------------------------
ZEBRA : CLI CONFIGURATION FOR FPM MODULE
========================================================
1. INTRODUCTION
================================
1.1 scope
This memo discusses the configuration option for zebra to update
FIB information to local and remote modules.
This will also helps to address the issue associated with CORD project.
https://jira.onosproject.org/browse/CORD-411
2. REFERENCE
================================
Quagga version 99.24+ ( main branch committed on 29-sep-2015)
3. PROBLEM DESCRIPTION
================================
Once FPM is enabled, Quagga periodically tries to initiate fpm
connection to localhost:2620. These values are non configurable in
existing implementation. There is no CLI available to configure
"host:port". hence limits us to use it for hardware based fast path
modules only.
4. PROPOSED CHANGES
================================
Following changes are done to the quagga code
a) Added new CLI to configure "host address : port".
The CLI format
<conf t>
$ fpm connection ip <ipv4 address> port <tcp port num>
and no fpm command to revert back to default
<conf t>
$ no fpm connection ip <ipv4 address> port <tcp port num>
b) Allowed values are ipv4 address and tcp port range <1-65535>
c) FPM initialization code has been enhanced to pick the "host
address : port" values from zebra.conf. if not found then
default values as localhost:2620 will be used. and updated the
information on to config file on write config command
5. FILES MODIFIED
================================
1) fpm/fpm.h :
a) Added MACRO to represent network order loopback ip
2) zebra/zebra_fpm.h :
a) introduced fpm_server variable in zfpm_glob_t handler to hold
the remote fpm server address
b) Hooked 'fpm_remote_ip_cmd' and 'no_fpm_remote_ip_cmd' at CONFIG
node to configure remote fpm detail and to revert back to
default respectively
3) zebra/zserv.c :
a) Hooked 'config_write_fpm' callback function, at ZEBRA_NODE to
display the fpm connection details on console on entering
command
$ show running_config
and to write to configuration file on entering command
$ write config
6. TESTING DETAILS
================================
6.1. default behavior
In default configuration FPM will attempt to connect to
localhost:2620
6.2. update fpm info
a) Using CLI command user can configure fpm host:port details
and can be able to write to config file(zebra.conf) using
write config command. this parameters has no
dependency/impact on other parameters of config file
b) show running-config/write config will display the fpm
information if configured. and will not display any
information related to fpm for default configuration
c) these configured information will be stored to config file.
only on write config command.
6.3 loading from config file
a) zebra attempts to connect to fpm server if fpm parameter
found in config file.else connects to default parameters.
b) if fpm connection drops, fpm will periodically attempts to
connect to remote server.
c) if fpm connections already established. then newly
configured fpm parameters will not disconnect the existing
connection. new connection to the different fpm server will
happen only after existing connection closes by either of
the end.
commit 9da9a61e2f8afb61aa31c17fb810169290bf96ee
Author: Donald Sharp <sharpd@cumulusnetworks.com>
Date: Tue Feb 2 21:11:40 2016 -0500
config: Remove unused library check
configure.ac is looking for the setproctitle library,
which while it might be useful, we never call setproctitle
or any other function that the library might expose.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Tested-by: NetDEF CI System <cisystem@netdef.org>
commit 071cfcd2e315499f0a4fa8c23779468eacc20033
Author: Donald Sharp <sharpd@cumulusnetworks.com>
Date: Tue Feb 2 21:02:42 2016 -0500
bgpd: Removed unused variable from 'struct attr_extra'
The mp_nexthop_local_in variable is never used. Remove it
from the code base.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Tested-by: NetDEF CI System <cisystem@netdef.org>
commit 9514fee4b37a9043738aa16ca8684993a1b572ad
Author: Donald Sharp <sharpd@cumulusnetworks.com>
Date: Tue Jan 26 11:44:14 2016 -0500
bgpd, ripngd, zebra: Remove duplicate PSIZE define
The PSIZE macro is defined the same in multiple places. Remove
the duplicates.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Tested-by: NetDEF CI System <cisystem@netdef.org>
commit 3c964045459f66921f8a3dc33fe4c028e6b0b141
Author: Donald Sharp <sharpd@cumulusnetworks.com>
Date: Mon Jan 25 23:38:53 2016 -0500
bgpd: Fix 'show bgp ipv4 vpnv4 statistics' cli.
When attempting to use the 'show bgp ipv4 vpnv4 statistics' cli, the safi
choosen is BGP_MPLS_LABELED_VPN which is #defined to 128. The afi/safi
combination is fed to bgp->rib, which limits the size of the safi to BGP_SAFI_MAX
which is #defined to 5. The correct value to use is BGP_MPLS_VPN
The bgp code differentiates between the actual safi value for BGP_MPLS_LABELED_VPN
used defined by RFC 4364, to a internal SAFI value used to limit array size.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Tested-by: NetDEF CI System <cisystem@netdef.org>
commit 687bea20fa61d8fc7cf48c0b227f16d0b324778c
Author: Donald Sharp <sharpd@cumulusnetworks.com>
Date: Mon Jan 25 14:56:26 2016 -0500
lib: Allow zclient do-over of connect on initial attempt
When a protocol is attempting to connect to the zebra daemon
through it's socket. If the inital attempt fails, give it a
few more attempts before giving up and leaving the daemon in
a bizarre state.
This problem was found by Ashley Penney, and Ashley was of
immense help in debugging and testing the fix for this issue.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Tested-by: Ashley Penney <apenney@ntoggle.com>
Tested-by: NetDEF CI System <cisystem@netdef.org>
commit 9145f0e4cf776bd3156620da6c8a772fee4d4383
Author: Balaji <balajig81@gmail.com>
Date: Wed Jan 20 22:59:27 2016 +0530
bgpd: Addition of bgp dampening configuration commands under IPv4/multicast
Signed-off-by: Balaji Gurudoss <balajig81@gmail.com>
Tested-by: NetDEF CI System <cisystem@netdef.org>
commit 9c52caeaf40e32701ff79a721f0fee52cfcbd77c
Author: Balaji <balajig81@gmail.com>
Date: Wed Jan 20 22:59:26 2016 +0530
bgpd: Addition of dampening show commands under v4 unicast/multicast tree
Patch contains addition of show ip bgp ipv4 (unicast| multicast)
dampening tree.
Signed-off-by: Balaji Gurudoss <balajig81@gmail.com>
commit df2ef24fb73c83a6e733be9eb8cac3e0df8467f8
Author: Matthieu Boutier <boutier@pps.univ-paris-diderot.fr>
Date: Wed Sep 10 16:50:45 2014 +0200
lib: Make distribute.c accepts both v4 and v6.
distribute.c doesn't allow to manage both v4 and v6 distribute lists. This
patch fix this problem by having 4 DISTRIBUTE* values in the enumeration instead
of two. The code in all daemons using distribute.c is adapted.
commit 543e791be9257e60d4d02abd0cdac7337a31636a
Author: Matthieu Boutier <boutier@pps.univ-paris-diderot.fr>
Date: Wed Sep 10 16:50:44 2014 +0200
ripngd: code simplification for redistribution.
Use loops and variables instead of doing each cases by hand.
Use boolean instead of having 2 almost identical functions.
commit fafa899b4e84c7b9fd07b076517744d9351aaa6b
Author: Matthieu Boutier <boutier@pps.univ-paris-diderot.fr>
Date: Wed Sep 10 16:50:43 2014 +0200
ripd: code simplification for redistribution.
Use loops and variables instead of doing each cases by hand.
Use boolean instead of having 2 almost identical functions.
commit 2074d6752d1dafcd6511677e2bdc9bbe0b73c388
Author: Matthieu Boutier <boutier@pps.univ-paris-diderot.fr>
Date: Wed Sep 10 16:50:42 2014 +0200
lib: simplify distribute.c's code.
Use loops and variables instead of doing each cases by hand.
Use static functions instead of rewriting code.
commit a3936d04942795bb92f04fefd25957c327e31c20
Author: Boian Bonev <bbonev@ipacct.com>
Date: Wed Jun 25 20:26:44 2014 +0300
bgpd: add aspath_aggregate_mpath that preserves path length
Issue - when two aspaths are aggregated the result will be with
different length if the two paths do not share common prefix.
E.g.: aggregation of 100 101 400 500 and 200 201 400 500 currently
will result in {100,101,200,201,400,500} which is of much shorter
length and is not ok to be readvertised becase may create shortest
path on the internet and cause infinite flapping.
aspath_aggregate_mpath will construct the followin path for the
above example: {100,200} {101,201} 400 500
Signed-off-by: Boian Bonev <bbonev at ipacct.com>
patchwork #994: http://patchwork.quagga.net/patch/994/
commit 6184c39e27d4b6f3721b8c4dc3df1b968e09606a
Author: Roman Hoog Antink <rha@open.ch>
Date: Mon Mar 17 14:01:42 2014 +0100
bgpd: implement admin distance
Until today the admin distance cannot be configured for any IPv6
routing protocol. This patch implements it for bgp.
Signed-off-by: Maitane Zotes <maz@open.ch>
patchwork #993: http://patchwork.quagga.net/patch/993/
commit d8f7f86a64842fcc6200c2fa4f560b9aa7a279bb
Author: Roman Hoog Antink <rha@open.ch>
Date: Wed Mar 5 09:13:43 2014 +0100
ospf6d: implement admin distance
Until today the admin distance cannot be configured for any IPv6
routing protocol. This patch implements it for ospf6.
Signed-off-by: Maitane Zotes <maz@open.ch>
commit a0a661f982c4a9726573faf28817d77d3e7cdad5
Author: boris yakubov <borisyakubov@ruggedcom.com>
Date: Fri Apr 26 14:38:34 2013 -0400
isisd: Segmentation fault on isis daemon fixes
I have a fix for 2 segmentation fault scenarios on the isis daemon:
1. When running a command "isis passive" on an interface in the
following context:
"end"
"configure terminal "
"interface dummy0"
"isis passive"
The trace back collected:
isis_adjacency.c:521
family=2,
root_sysid=0x20aee6d0 "", parent=0x20af4d68) at isis_spf.c:999
sysid=0x20aee6d0 "")
at isis_spf.c:1217
isis_spf.c:1372
isis_lsp.c:416
isis_lsp.c:1660
isis_main.c:368
The fix location:
file name: isisd/isis_adjacency.c
routine name: isis_adj_build_up_list
2. When deleting the existing isis router instance:
"end"
"configure terminal "
"no router isis DEAD"
The fix location:
isisd/isis_events.c, routine circuit_resign_level
isisd/isis_lsp.c, routine lsp_destroy
isisd/isis_route.c, isis_route_validate
The trace back collection:
"DEAD") at isisd.c:252
argc=1, argv=0xbfc39054) at isisd.c:1520
vty=0x20d6f528, cmd=0x0) at command.c:2121
cmd=0x0, vtysh=0) at command.c:2155
isis DEAD") at vty.c:433
isis_main.c:368
and
"DEAD") at isisd.c:260
argc=1, argv=0xbfd6cf54) at isisd.c:1520
vty=0x208cb528, cmd=0x0) at command.c:2121
cmd=0x0, vtysh=0) at command.c:2155
isis DEAD") at vty.c:433
isis_main.c:368
The patch is included.
patchwork #833: http://patchwork.quagga.net/patch/833/
commit a343cf8d74920752ba0e35142e23a3ca56620755
Author: Christian Franke <chris@opensourcerouting.org>
Date: Mon Jan 14 23:41:57 2013 +0100
lib: update Solaris multicast API (BZ#725)
On OpenIndiana/Solaris the build fails with "unsupported multicast API".
It's only in the IPv4 part where setsockopt IP_MULTICAST_IF needs a
local address and not the index (IPv6 wants the index).
The following code walks the list of interfaces until it finds the matching
index and uses the interface's local address for the setsockopt call.
I don't know if it works on Solaris < 10 (I guess yes, but I don't have
any machine to verify it).
[NB: this breaks unnumbered setups that use the same IPv4 address on
multiple interfaces. -- equinox@opensourcerouting.org]
Reported-by: Brian Utterback <brian.utterback@oracle.com>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Patchwork #762
commit d319a3abbf6e6c310b6b6a6891ebe1957592f9a9
Author: Paul Jakma <paul@jakma.org>
Date: Wed May 25 14:47:00 2016 +0100
ripd: split-horizon default differed between rip_interface_new and _reset
* rip_interface.c: Default for split_horizon_default differed between
rip_interface_new and rip_interface_reset, causing at least some issues
after interface events. See patchwork #604. Fix, and consolidate code.
(rip_interface_{reset,clean}) rename these to 'interface', as that's more
appropriate. Spin the ri specific bodies of these functions out to
rip_interface_{reset,clean} helpers. Factor out the overlaps, so
rip_interface_reset uses rip_interface_clean.
(rip_interface_new) just use rip_interface_reset.
* ripd.h: Update for (rip_interface_{reset,clean})
Reported by xufeng zhang, with a suggested fix on which this commit expands.
See patchwork #604. This commit addresses only the split-horizon
discrepency, issue #2. The other issue they reported, #1, is not addressed,
though suggested fix seems inappropriate.
Cc: xufeng.zhang@windriver.com
commit 86b2a0a12ace817e64e8e4a719b1ba9a8e6af253
Author: Lou Berger <lberger@labn.net>
Date: Tue May 17 12:19:51 2016 -0400
lib: change command logging to be off by default
* lib/vty.c: add 'log_command' to enable logging of vty commands executed.
Default command logging to off.
commit f53585d59b62b12d68282154af346796b75c7f2f
Author: Lou Berger <lberger@labn.net>
Date: Tue May 17 07:10:36 2016 -0400
bgp: add "debug bgp allow-martians" next hops and related code/commands
commit ac6ff4643645315db648604771926218aa4ead2d
Author: Lou Berger <lberger@labn.net>
Date: Tue May 17 07:10:37 2016 -0400
bgpd: Add flag to not change e{u,g}id on startup and run as unprivileged user
* bgp_main.c: add -S / --skip_runas flag to not change effective user/group
on start up. Enables bgpd to be run by unprivileged user.
commit 5f678889843fb9bc3f07d05eebc2f8fb35584a91
Author: Igor Ryzhov <iryzhov@nfware.com>
Date: Fri Apr 22 17:38:24 2016 +0300
zebra: add missing vty commands
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Tested-by: NetDEF CI System <cisystem@netdef.org>
commit aef4650851cf0f74d944466d50e26bb8f8635c3d
Author: Stas Nichiporovich <stas@iptel.by>
Date: Tue Apr 26 08:14:36 2016 +0000
zebra: fix crash caused by using route-map with "set src"
Signed-off-by: Stas Nichiporovich <stas@iptel.by>
Tested-by: NetDEF CI System <cisystem@netdef.org>
commit bb01bdd740339b0c07d8ed0786811801b2a79192
Author: Jafar Al-Gharaibeh <jafar@atcorp.com>
Date: Thu Apr 21 16:22:33 2016 -0500
ospfd: fix - correct neighbor index on changing/p2p/virtual links
ospfd keeps a list of neighbor routers for each configured interface. This
list is indexed using the neighbor router id in case of point-to-point and
virtual link types, otherwise the list is indexed using the neighbor's
source IP (RFC 2328, page 96). The router adds itself as a "pseudo" neighbor
on each link, and also keeps a pointer called (nbr_self) to the neighbor
structure. This takes place when the interface is first configured. Currently
ospfd adds this pseudo neighbor before the link parameters are fully configure,
including whether the link type is point-to-point or virtual link. This causes
the pseudo neighbor to be always indexed using the source IP address regardless
of th link type. For point-to-point and virtual links, this causes the lookup
for the pseudo neighbor to always fail because the lookup is done using the
router id whereas the neighbor was added using its source IP address.
This becomes really problematic if there is a state change that requires a
rebuild of nbr_self, changing the router id for example. When resetting
nbr_self, the router first tries to remove the pseudo neighbor form its
neighbor list on each link by looking it up and resetting any references to it
before freeing the neighbor structure. since the lookup fails to retrieve any
references in the case of point-to-point and virtual links the neighbor
structure is freed leaving dangling references to it. Any access to the
neighbor list after that is bound to stumble over this dangling pointer
causing ospfd to crash.
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
Tested-by: NetDEF CI System <cisystem@netdef.org>
commit e6ec2d6d18dadb119b93284ef2f5f5b5440d6f66
Author: Donald Sharp <sharpd@cumulusnetworks.com>
Date: Fri Apr 8 19:30:51 2016 -0400
lib: Fix priviledge modification for vty group specified
When attempting to switch runtime permissions over to
the correct group specified for the vty group, if the
user specified to run as does not have that vty group
then do warn about the issue and stop running
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reported-by: Thomas Martin <tmartincpp@gmail.com>
Tested-by: NetDEF CI System <cisystem@netdef.org>
commit 190591f0fe3388c746ea48f69a439f4bd0b49834
Author: Jafar Al-Gharaibeh <jafar@atcorp.com>
Date: Thu Apr 21 17:40:12 2016 -0500
zserv: [pimd] fix - avoid dereferencing a NULL pointer
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
Tested-by: NetDEF CI System <cisystem@netdef.org>
commit 80f61a9979079ed16b9eff50ba65ad8bf1b15fb6
Author: Jonathan Hart <jono@onlab.us>
Date: Tue Apr 19 22:13:49 2016 -0700
pimd: Fix hang when doing nexthop lookup from zebra
I was running in to a bug when pimd would hang in some cases when
it had to do a nexthop lookup from zebra, such as when a PIM JOIN
was received. This issue could be easily reproduced by running
'show ip rib <ip>' from the pimd vty which forces a nexthop lookup.
The issue is in zclient_read_nexthop, the zclient_read_header function
reads the message content into the stream, but then after that the
zclient_read_nexthop function tries to read the message content again
from the socket, but there are no bytes so it hangs waiting for input.
The solution is to not try to read the message content the second time.
Acked-by: Jafar Al-Gharaibeh
Tested-by: NetDEF CI System <cisystem@netdef.org>
commit 7e73eb740f3c52a5b7c0ae9c2cd33b486d885552
Author: Timo Teräs <timo.teras@iki.fi>
Date: Sat Apr 9 17:22:32 2016 +0300
zebra: handle multihop nexthop changes properly
The rib entries are normally added and deleted when they are
changed. However, they are modified in placae when the nexthop
reachability changes. This fixes to:
- properly detect nexthop changes from nexthop_active_update()
calls from rib_process()
- rib_update_kernel() to not reset FIB flags when a RIB entry
is being modifed (old and new RIB are same)
- improves the "show ip route <prefix>" output to display
both ACTIVE and FIB flags for each nexthop
Fixes: 325823a5 "zebra: support FIB override routes"
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Reported-By: Igor Ryzhov <iryzhov@nfware.com>
Tested-by: NetDEF CI System <cisystem@netdef.org>
commit 7e7a101dde5969f62074801d84bb4cc75e50f548
Author: Donald Sharp <sharpd@cumulusnetworks.com>
Date: Fri Apr 8 22:03:22 2016 -0400
ripd: Fix Null pointer dereference
The rip_output_process function dereferenced a NULL
pointer. Core file examination showed that tmp_rinfo
was NULL on line 2435. Looking at the last diff
associated with this commit, it was obvious that
a formating mistake had been made in the loop over
the route nodes list of possible paths.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reported-by: Sebastian Kricner <sebastian.kricner@tuxwave.net>
Tested-by: NetDEF CI System <cisystem@netdef.org>
commit e7207098c0fa88af6899c1b1483e3ddb19f5336a
Author: Christian Franke <nobody@nowhere.ws>
Date: Sun Apr 3 12:46:28 2016 -0300
isisd: ignore unknown interfaces when adjusting IS-IS mtu
For example during startup of isisd, the MTU of interfaces is not
known, since this information will only be available once the
interfaces have been learned from zebra.
It makes no sense to include the MTU 0 that is stored for interfaces
in this state in the consideration whether a new lsp-mtu for an
area is valid, so skip interfaces which are in this state.
Signed-off-by: Christian Franke <nobody@nowhere.ws>
commit 84a4da039fa620942b6c3a9ff21b7502803f53be
Author: Christian Franke <nobody@nowhere.ws>
Date: Sun Apr 3 12:46:27 2016 -0300
isisd: make sure that all interface addresses are advertised
If the following configuration commands are run interactively in
succession, the ipv6 addresses of this interface won't be advertised
in the router's LSP immediately:
# interface eth0
# ip router isis test
# ipv6 router isis test
This is because the ipv6 router command won't trigger a state change
for the interface and therefore, it won't trigger a regeneration of
the LSPs.
The same thing happens if IPv4 is enabled after IPv6, or for the cases
where IPv4 is disabled and IPv6 stays enabled or vice-versa.
Fix this by explicitly calling lsp_regenerate_schedule for the cases
where it won't be called implicitly.
Signed-off-by: Christian Franke <nobody@nowhere.ws>
commit 8ed8d0b5d1596ec9a6cce5ca45eb1cb1dff94978
Author: Christian Franke <nobody@nowhere.ws>
Date: Sun Apr 3 12:46:26 2016 -0300
isisd: fix a crash due to an lsp-mtu issue
isisd crashed on startup if it was enabled for an interface with
a too small MTU.
To fix this, we treat this case as an invalid configuration and
disable isis on that interface if that case happens, since it is
a configuration error.
Signed-off-by: Christian Franke <nobody@nowhere.ws>
commit 106e38e4d42ecd94c083907872d514e8c67036f6
Author: Christian Franke <nobody@nowhere.ws>
Date: Sun Apr 3 12:46:25 2016 -0300
isisd: work around route table asserts for deleting node with info
The route table code in lib/table.c triggers an assertion when a route
node with rn->info != NULL reaches refcount 0, probably to avoid
memleaks. In this particular case, this is not an issue, since the
info will be freed by the destructor.
However, since removing this assertion probably requires more
discussion, just make sure that rn->info gets freed and unset before
its refcount is decremented to zero.
Signed-off-by: Christian Franke <nobody@nowhere.ws>